Search results

  1. C

    Help identifying a motor clutch

    As above, I have this motor here and the one way bearing is slipping. I've looked across Ali express and cannot find a new one. This has 31 tooth nylon gears and the measurements are in the photos Has anyone come across one of these before?
  2. C

    Battery issues

    I've recently acquired two faulty battery packs. One is a 10ah from a elife folding bike and the other is a vruzend kit. The elife battery 10s5p was from my mates missus bike. I built him a new pack the other day. When I tested the pack at the main battery terminals it measured 14.7v when I...
  3. C

    Mxus xf08c Hall sensors

    OK so my hall sensors weren't working on this motor due to a damaged motors cable. I didn't have enough space to clear all the silicon and pull the cable through to re terminate it with the hall sensor pcb in situ. I de soldered the board ok but carelessly I managed to break a leg on one the...
  4. C

    New build trek navigator

    So at the weekend I'll be picking up this lovely trek navigator to convert for my other half. I'm using her current power cycle Milan 2 as the doner for the electric parts. It has a upgraded 10s 4p battery that I built last year and a rear hub motor. At some point in the future I will buy a...
  5. C

    My new bike

    Just picked up my own ebike today. Giant twist express rs2. Was listed on ebay as not charging after being stored for 2 years in his shed. I was expecting the battery to be scrap after being stored for so long however when I got it home it turned on fine. I checked the pack and it was at...
  6. C

    Connecting 3 wire speed sensor to brainpower controller

    Recently installed a brainpower controller but as the hub didn't have a speed sensor white cable from the hall sensors in the rear hub we only get a speed and distance reading while the motor is running. I've bought a 3 wire speed sensor kit off ebay with a spoke magnet. I attached the sensor...
  7. C

    Building my first ebike battery

    Hello all. I'm just ordering all the parts to build my first ebike battery. So far I've ordered 40 LG m29 cells rated at 10a continuous discharge, and a 20a continuous balancing bms. I'm going to make a 36v 10s4p pack to replace the battery in my missus powabyke Milan 2. The current pack...
  8. C

    Powacycle Milan 2 battery issue

    Hello I found your forum after googling about battery issues on my mrs ebike. We bought it used last year very cheap, it was sold because it cuts out occasionally on hills. My Mrs used it a few times but it only cut out once or twice as she is a bit lighter than the bloke we bought it off. It...