Search results

Hi having had the bike stop pulling me up hills I took it apart and found the small cog with a horse shoe clip holding it in place when removed and cleaned has safty system not seen till removed the round spindle that goes through the middle of the cog has 2 flat sides and the cog has what looks...

Hi I have a powabyke I'm doing up I striped it down but got stuck on the crank as it's seased in so with lots of effort I got the locking nut undone that's on the spindle that the peddles go on it's a 22mm spanner that fits the nut it sits next to a washer then the deep nut that holds the...

Well I've got the paint it's smooth as they only do this colour in smooth Finnish. I've got lots of small gags to put parts in as the come off my powabyke and all will be cleaned and lubed b4 putting back I wil post pics when done but if any one has ant tips please pop them down for me thanks Paul

went out with the wife on my powabike today for the first time it was great not having to peddle back and to have help on the steep hills so if any one has bad knees like me the get a e-bike just to be out in the fresh air was great

Bit of help if you can my rear wheel rim is cracked.but the cogs on the chain Side and the speed sensor on the other are fine so I want to take the wheel off and put them on a new one as it's only £30 to buy the write size. So can it be done. Has any one done it. Or do I need a special wheel...

I have a silver powabike with lots of scrapes I've looked at the proper way to do it a new colour but hamerite red or black would be fine, thing is has anyone been as lazy and cheap as me to use the paint and brush. The bike is about 7 years old. Thanks for any replies Paul

Hi I just got a powabike and would love some help as a newbee to e,bikes I use an iPod touch but can't upload pics from it so they will follow when next on comp. The bike has asid batts old type but the round charge plug not the kettle one only there is no lights on throttle just a long red one...