Search results

I have taken images of the control outlet to each device, with the device shown. The throttle to control is cable colours do not match, but only 2 four wire receptacles, the display and the throttle, the display colours match.

Yes tried, wondered what readings from the 3 wires from the controller when detached from the motor, when pedalling?

I have now, with the bike upside down, reconnected the controller as before and turned the pedals and operated the throttle, no motor output. Checked the voltage of throttle outlet from controller 4.4v. The LED at the throttle does not light up, although the display panel does. The crank sensor...

Thank you, that's answered the unknown. I did spin the front wheel whilst operating the throttle, no result. To be clear, I connected this to all functions, PAS sensor and throttle, but what threw me was the lack of a selector switch, so my assumption was the controller reacted to the stopping...

There are 4 wires from this connection.Green,Black White Red. Meter reads Green to black 40.1v, Green to white 36.8v, green to red 3.3v, green positive.

Thank you, will try to attach image of the controller, marked up with labels of use.

To introduce myself, I am now retired and in need of exercise and interest. Having spent some time as a guest going through the information on this site. I ordered a set of equipment from Outrider, this arrived in Nov 13. This was to convert a Brompton M3L. My problem, I thought I had gained...