Search results

Hi again, below is all the info I have, The complete kit was bought from electricbikeconversions.co.uk in Datchworth UK. The battery is a 13AH unit and I do have reasonable DIY skills. Does this help? Tks Conversion Kit Specification: Rated Power – 250w Nominal Voltage – 36v Technology –...

I am fed up with the loud whine that comes off the motor. Should I change to a sinewave controller, if so, which one?

I think what probably happened was that a spoke broke which then jammed into the derailleur, I had the same experience. The hanger snapped off, the chain was u/s and the derailleur itself was bent and twisted. Nothing a £100 couldn't fix!! I think some of these chinese wheel/motors are a bit...

One of the initial settings on most controllers is "wheel size" also I see no reason why any decent bike tech can't respoke a wheel or he is not worth his salt.

Yes, a good bike shop should be able to re spoke the motor into a 26" wheel rim but it might cost a bit. There are no problems with then changing the controller settings to he new wheel size.

have a look at this site: http://www.pandaebikes.com/docs/LCD03manual.pdf it gives all the codes for the controller, Also the main Pandaebikes.com site has some really useful info

HI Guys and thanks for your replies. Actually it turned out to be one of the "hidden" settings of the controller that for some reason had changed, a glitch from somewhere!!! All is well again

I have an EBC conversion with I think a Kunteng controller. Yesterday I suddenly realised that when I stopped pedalling and just freewheeled the speedo indication when to zero until I started pedalling again. Also, there is a dealy before the speed is registered when I start up. I don't think...

Is it possible to buy a regenerative charging system whereby when not using peddle assist the bike battery is charging. Useful when going down hills especially

A short time ago I modified my Claud Butler with a kit from "Electric Bike Conversions" and have been very happy with both the result and the support from the firm. I also modified a friend's bike successfully. I understand that the control unit supplied is a square wave device which gives...