Search results

  1. R

    Battery query

    This is what the innards look like !
  2. R

    Battery query

    Thanks for your replies. I have opened the case. The battery pack seems well built. Seems to have a protective layer around the batteries and is shrink wrapped, similar to the vid. Will try and post some pics. Cheers.
  3. R

    Battery query

    Hello, I am fitting a kit to my wife’s road bike and have been considering a soft pack battery to go in a rack top bag. I have a spare hard shell battery and am wondering if I can discard the shell ? As it is the battery is too big to fit in the rack top bag. I have opened the shell and it...
  4. R

    Removing battery on Cannondale Synapse Neo

    There’s a catch you need to press . When the key is turned and the battery pops out slightly, feel along the bottom edge and you will feel the catch, press it and you can then slide the battery out
  5. R

    orbea gain

    I really wanted one of these,mainly because of its looks and weight being quite 'normal', but after a lot of dithering I finally realised that it couldn't do what I needed (Ended up with synapse Neo )
  6. R

    Kt-lcd5 problem

    I checked the lcd3 I have and it has the L parameters. L2=1 as you say. If you can spare one of your lcd4s that would be great. Your help is very much appreciated. Thanks.
  7. R

    Kt-lcd5 problem

    Thanks for the replies. I double checked the settings before I posted, but I’ll check again. If I recall correctly the P1 setting is 140. I’ll have a look at the lcd3 for the L parameters as soon as I get a chance. Thanks again
  8. R

    Kt-lcd5 problem

    Hi Folks, I have an mtb fitted with a Xiongda ywt-06 36v front hub motor, Kt controller and , originally, kt-lcd3 screen. All bought from Xiongda. This was working fine ! Then decided to de-clutter the handlebars, and as I had a Kt-lcd5 that was no longer being used,I swopped it for the lcd3. I...
  9. R

    Cannondale Synapse Neo

    I can't tell when the motor cuts out . Quite often I'll be barrelling along with a big smile and only realise I'm doing all the work when I glance at the speedo ! The only times I notice the weight is setting off with no power and when I (occasionally)get out of the saddle, but I used to do...
  10. R

    Cannondale Synapse Neo

    No rattling on mine ! Only problem I've had so far is downshift can be quite clunky when in small chainring on front. This is most likely me being cack-handed ! How did find out about the software update ?
  11. R

    Cannondale Synapse Neo

    Must have been having a full on 'numpty' day ! Had a go at fitting the full length bluemels mudguards. Fitted quite easily 'cos I had forgotten the stays are adjustable .:rolleyes: Then I 'discovered' the front forks are drilled and tapped at the rear,:rolleyes::rolleyes:, so I'll try fitting...
  12. R

    Cannondale Synapse Neo

    Meanwhile........has anyone fitted mudguards ? I've tried fitting my race blades but the rear is asymmetrical and I can't get them to sit right. I was going to fit some full length bluemels but there is no facility on the front fork/header tube for the top fixing ! Doh !
  13. R

    Cannondale Synapse Neo

    I searched and searched for information about fitting lights but could find nothing other than it is pre-wired !
  14. R

    Cannondale Synapse Neo

    Not quite Snowdonia, it's the Trans Pennine trail near Barnsley!
  15. R

    Cannondale Synapse Neo

    Hi Bonky, I try to avoid the rain. I don't mind getting wet, but if I get wet and cold it knocks me up for a couple of days. So I use full length SKS bluemels guards over winter . Not had them fitted to the Neo yet, but I've tried them for size and they do fit okay . I also use SKS race blades...
  16. R

    Cannondale Synapse Neo

    That seems likely. Might investigate further. Cheers !
  17. R

    Cannondale Synapse Neo

    Does anyone know what the length of wire ,which was in the charger box, is for? In the box was the charger, the removeable bridge for rear mudguard and a length of wire which has a small plug on one end and bare wire at t'other (?) Ps had bike 2 weeks now ,it is every bit as good as mentioned...
  18. R

    Cannondale Synapse Neo

    Thanks for the part number, I'll probably get a spare set to keep in my saddle bag . That way I won't ever need it ! Bike all sorted,tried it out at shop,everything seems ok. Planning a ride at weekend
  19. R

    Cannondale Synapse Neo

    That seems quite ridiculous doesn't it ? When I went for my bike the seatpost was badly scratched so they swopped it off another Neo they had in. Assume this is when the seat post bolts weren't tightened enough Taking bike in today to be sorted using bits off this other Neo !
  20. R

    Cannondale Synapse Neo

    Well, went out on the Neo today. Absolutely loved it. Took it on one of my regular routes and was really pleased with how it performs. Then the saddle fell off ! Had just set off from a junction when I felt the saddle move ,so I stopped and dismounted and the saddle fell off, one of the seat...