Search results

I have a EBici bike here with faults. I have been through the set up procedure a few times but to no avail. The faults - power assist comes in and out randomly and the amount varies regardless of the level (1 to 6) selected. The display shows inaccurate information regarding speed etc. Is...

I have a Chinese generic 36v rear hub drive, silver fish battery powered bike come into my possession. It had no battery so I've fitted a spare 48v battery that I had. All runs well, surprisingly good bike. There's a 2 position selector switch on the left side. "Start off" or "Pedal" There's a...

Hi, can anyone help? I have been running a 500w MXUS kit on a bike for nearly 2 years and with a couple of thousand miles on it can say its fine. Its been running 14S Lipos and a shunt soldered to give 30a peak draw. Whilst it has been fine I have tired of messing with lipos and have fitted a...

Hi, Is there a derailleur hanger that would facilitate fitting a derailleur gear changer to a frame that is designed to effect chain adjustment by sliding the wheel backwards in a horizontal slot? - You know the one with the little adjuster on the end. (Hope I've described that well enough - I...

I maintain a few electric bikes, one being my wife's Ezee Liv. I'm fairly sure the brushes need replacing. I had the wheel out and hub stripped as far as I could whilst away on holiday. I couldn't get to see where or how the brushes fit with the amount of strip down I was able to achieve...

My trusty soldering iron has packed up. I have had it for nearly 40 years and despite being rated at only 30w has done most things I've asked from it and done them well. I bought a 50w iron a couple of years ago as a standby but it is useless. It has a steel tip rather than copper and has...

I'll start by apologising for raising an old chestnut once again but I just can't find the old threads - even though some are very recent. Anyway I need a considerably better front light than the 36v ex eZee led light that I currently rely on. It's good for being seen but not for seeing with...

As per the heading. I have a battery on my Saracen made up of 9 RC lipos. They are in 3 strings of 3, and is termed 14s/3P Each string has 2 off, 4S packs each 5000mah and a single 6S pack also 5000mah. So it's 58v but how many ah? PS: whatever it is its not enough though given the...

As promised I've added a couple of pictures of my 48v conversion on an eZee Liv. It's the earlier model with Brushed motor. It came to me from a friend who was scrapping it. The battery had been retained by the dealer who had condemned it, the owner retained the charger (he has 2 other eZees)...

Ezee Torq Electric Bike | eBay Looking for £220

I've never owned a bike with hydraulic disc brakes and have a couple of questions of those of you who do. Are cheap hydraulic brakes better than good cable discs or even good rim brakes? Is it usually possible to unbolt your cable operated calliper and bolt on your hydraulic calliper onto...

I see that my Saracen thread has been moved, presumably because it is technically an off road bike. That's fair enough but can I ask why my thread has moved and others haven't when they are also discussing bikes of over 250w? I see moving to this other obscure forum section as basically...

I've acquired an Ezee Liv (nearly all my bikes are Ezees!). It came with no battery or charger. I have a 48v 10A battery / charger coming from BMS. I have bought a generic, 48v dc controller from EBay to run the new set up. What does anyone think each of the plugs do? (looking for...

Hi, I have just completed a build using a Saracen 700C wheeled roadster and a MXUS kit. The MXUS motor is a copy of the Bafang CST, ie strong, geared, brushless motor. Whilst I have completed the build I am going post on the thread in bite sized chunks. The purpose of posting is for general...

Following a comment from someone on here I bought two of these digital volt meters. Waterproof Digital Voltmeter DC 15V To 120V Red Led Voltage Digital Panel Meter | eBay Plan was to fit one to a large leisure battery I run a Lipo charger off, the other would be fitted to a bike I also run...

I've sent you a lengthy PM which won't go because you need to clear some space in your inbox. - ps sorry to everyone else

I'm looking to change the controller on one of my bikes. On one of my bikes I'm currently running a 36v sensorless controller from ecrazyman that pulls 17a maximum. The motor is an oldish Bafang that is in good order. That set up has been fine for the last 3 years. For the last 500 miles...

Am on holiday in germany with a friend with an Ezee Liv. It got wet and has been problematic since. The controller etc is now dry - its 30c plus every day. The diagnosis light is flashing 3 times indicating a brake cut off fault. The brake levers seem ok, so what i'd like to know is, how can...

Hi, I have and use in my RC Hobby large lipo batteries - 6 cell, 5000mah Turnigys to be precise. I have built up a 12S2p pack to run my bike on them and all works fine. I'm currently stripping the battery pack down and balance charging each cell on my Lipo charger as and when a recharge is...

Wow, 250 to 410 dollars for the delivery of a wheel kit from BMS! Don't think so.