Search results

  1. L

    Kt controller problem.

    Ok, thanks. I will try it letter.
  2. L

    Kt controller problem.

    I connected and it didn't work. So I disconnected it.
  3. L

    Kt controller problem.

    Resistance is about 5,5kR and going up. Someone said that I should connect + and signal on throttle plug. If motor will work controller is ok.
  4. L

    Kt controller problem.

    Ok. Without motor I can't check controller?
  5. L

    Kt controller problem.

    I know that s866 don't work with KT. I didn't use this like that. I have controller s866 and used dislay with only that controller. \ Ok, I will try with PAS. So I need connecta PAS sensor and rotatate a magnet disc?
  6. L

    Kt controller problem.

    I haven't LCD for KT, only for S866. I didn't try with pas. I need check how to connect it (other wires colors). On S866 on display wire is only 5V. I cant turn on LCD. Propably broken is hallotrone in throttle.
  7. L

    Kt controller problem.

    Hello! I have a problem with the KT driver. Everything is ok on outputs (54 on display, 4.6 on sensors). I have a jumper (I don't know how it call, I connect red - blue and yellow - black) on the display plug and a throttle. HaiLong 48V battery on. The controller does not respond when the...
  8. L

    Overvolted Carrera e spec is a monster!

    https://www.ebay.co.uk/itm/48V-36V-17A-KT-Controller-For-250W-350W-Brushless-Motor-E-bike-Electric-Bicykl/174120284309?hash=item288a60b095:g: LrUAAOSwBY5d7fco That will be good?
  9. L

    Overvolted Carrera e spec is a monster!

    You use a 48V controlle 250W or 500W? Carrera motor is 250/400 so I don't know how much power I can use.
  10. L

    LCD S866 + Brainpower controller

    Thank, I will check it latter.
  11. L

    LCD S866 + Brainpower controller

    Inside display, on circuit board?
  12. L

    LCD S866 + Brainpower controller

    Hello! Anyone know the solution to the e10 error? I use the controller for two months. Only since yesterday I have this error. I changed the throttle a few days ago.
  13. L

    Carrera crossfire/vulcan tuning

    You need to connect two cables from the PAS sensor. I don't remember which ones they are.
  14. L

    Carrera crossfire/vulcan tuning

    Hello! My English is poor, but I will try to describe a groundbreaking discovery. Bicycle: Carrera Vulcan. I have repaired the crank sensor on my bike many times, so I ordered a new controller. Today I rided on broken bike (but I connected the battery and display). The chain fell and ripped...
  15. L

    Carrera crossfire/vulcan tuning

    So, sa suntour display works only with sa suntour controller, yes?
  16. L

    Carrera crossfire/vulcan tuning

    To the controller can I use the Sa Suntour display (the one from the bicycle)?
  17. L

    Carrera crossfire/vulcan tuning

    Anyone for sale a sensor from this crank? Possibly someone print the housing for the module?
  18. L

    Carrera crossfire/vulcan tuning

    I won't play with it anymore. Inside is dirty, but it will soon montage the PAS. I have repaired it too many times. What is the controller maximum current (in Amps)?
  19. L

    Carrera crossfire/vulcan tuning

    Hello! At the beginning I'm sorry for my English. The crank sensor broke down quickly. I repaired it several times, glued the casing, repaired cables. A few days ago it broke again. I glued the housing again. Did not work. One of the sensors was filled (i don't know what word I can use, gap was...