Search results

I am confronted now with exactly that problem. Controller of a TRANZ X bike was broken. Replaced it by a chinese kit with LCD. Everything is running smootly. Only the power brake is inversed. I have been measuring 0V on contact with magnet and 5V (4.3V) when brake is drawn. (contact opens) I...

to anybody who is interested! throttle arrived today, and is working like a charm. ONLY problem: Error 07 (motor problem). Apart from this I have noticed that Aliexpress seller has removed wrong "advertisment" and put new description "THROTTLE REQUIRED". I got the feeling it is a pure scooter...

what would be a valid simulation that the controller thinks that a throttle is present in zero position? Some say a Resistor between GND and Signal 330 ohm would help

The main question should be and remains unanswered: Is it possible that a missing throttle can result in ERROR 008? I do not think so! The supplier just tries to avoid claims. A throttle in position zero delivers how many Volts on signal cable? I am pretty sure in this forum are a couple of...

I found a soution for dysfunctional PAS. GND was dead, i took another black cable from elsewhere and now it works just fine. Error 008 still shows. I will get a Thumbthrottle in about a month. Then I can try if this error will disappear.

Connected always: POWER + 3 Motor Phases, 5 pin Display Tried with and without: HALL 6pin, PAS, Break 2 pin Never Connected: Throttle, Lamp

nothing is or ever was connected to throttle cable if you mean that.

Working: Self learning cycle forward and reverse. LIGHT 42V. WALK 6 kmh and correctly stopped by break contacts. NOT WORKING: PAS and Speed sensor. I measure: +5 V on Throttle but nothing on PAS (missing 5V there) I got the impression that PAS is faulty ... not sensor but controller internally

i have tried everything! even without HALL. Motor runs just on three Powercables as well. But whatever results in E008. Nothing ever connected to throttle. I have even trien another BAFANG front motor. With and without HALL. Same result

in case of no throttle connected what could throttle error 008 be then? supplier has asked me to connect any throttle while self learning can be removed later. i do have no throttle here can anybody recommend me a trick how to simulate a throttle just for startup?

A new Brushless controller called 36V 18A BLDC motor controller S866 LCD Display connected to a quite old front hub motor gave me ERROR 08 after self learning process. Nevertheless motor is turning smoothly. I am convinced it is a HALL related error although supplier calls it Throttle error...