Search results

Many thanks, measured my battery pack and realised I had the 1.2 size not 1. Will check pins carefully.

Sorry keeping all mine. Check eBay and gumtree for the Trek 4500, there are a few for sale. The gear and brake cables don't run under the bottom bracket. It's a very nice light, old school 26 mountain bike with quality components. Took it out through the woods last night, very impressed. May...

I currently have a Hailong 1 battery case fitted and am thinking of buying a Chamrider 19.2AH battery. The Chamrider battery comes in a Hailong 1.2 case. Do the various Hailong cases use the same mounting plate? I'd like to be able to swap between batteries. From the Chamrider Aliexpress web...

Very kind offer, checked the video out, I'm convinced. Will do more research as the flashing process looks a bit complex.

Bike built and working, done 240 miles in 4 days. Very impressed, trouble is I already want more power and a bigger battery. Currently have 48V 500w motor and 13.2 AH battery. Range has varied between 40 and 60 miles. The other problem is my search for donor bikes on Gumtree has resulted in me...

Thank you. Managed to get the walk assist to work. Tried moving both cranks to stimulate the torque sensor, limited reaction. I'll stick it on the bike and give it a go.

That's great thanks, I'll do what I should have done in the first place, read the manual.

I am about to install a 48v tsdz2 without throttle and want to test before installation. On my workbench I have connected the battery, motor and display, not the speed sensor . The display came on when I switched the battery on, I turned the crank,but got no indication that motor was assisting...

After much searching I ordered one of these from Sports Direct for £400 with discount https://www.sportsdirect.com/spyder-rogue-30-mens-932062#colcode=93206203 It seemed good value with an air fork and XT rear mech. However on arrival I discovered it had an 83mm bottom bracket, so back it went...

That's really handy advice, thank you. I've decided to buy the motor before the bike so I can get a better feel for stuff like the anti turn bracket. The clearance looks tight between the bottom bracket and motor. I may fit it to an existing cheap MTB I own just to get the hang of what's...

I'm going to install a 48v 500w TSDZ2 on a new yet to be purchased hardtail MTB. This will be my first conversion.I have a bike wishlist air forks, decent Shimano brakes and rear derailleur. In order to give the motor more ground clearance I thought I'd go for a 29er. I've been trawling through...