Search results

Hi, I'm wanting to make my bike faster when it comes to acceleration, how would I be able to achieve this? My bike is a stealth bomber running 3kw motor, battery is a BTR power 60v 25ah lithium battery( charges to 71.4v and has a rated DC current output of 50a i think , the controler is a 150a...

Hi, I'm not sure If this is the correct section to put this but here goes. I have a stealth bomber with a 26" front wheel and I think it's a 1.5" wide tire( quick release wheel) And I've just purchased some new fat forks ready to get my fat wheel in a few weeks but meanwhile I need to use my...

Hi, I have a stealth bomber and I'm wanting to install a full lighting system. I currently have the 72v light kit you can get from ebay with headlight, turn signal, rear light etc.. but I'm wanting some individual rear turn signals as the ones I have are really close together and it's hard to...

Hi, so I have a 60v 25ah lithium battery17s fully charges to 71.4v) and recently with the cold weather etc I left my stealth bomber in a outhouse where it is very cold, when I went out the other week I charged the battery when it was freezing and noticed the battery was on 66v just after a short...

Hi, I purchased a 3000w 26" 4.0" fat tyre hub motor for my Stealth bomber and I've ran into a couple of issues and need some advice of possible, First off is when I have tightened the wheel up the motor wire seems very close if not slightly touching the disc rotor I didn't realise until I came...

Hi, I've used my new sabvoton 150a controller for couple of days now, at first all the power would go off on the bike when I accelerate quickly, now i have fixed that somehow lol. I'm just wanting to know if It would blow anything as I have my max throttle voltage at 4.80v, max throttle current...

Hi, I received my 150a sabvoton controller and I connected it all up and ran the hall angle test and all went smoothly and fine, for some reason when I apply allot of throttle from standstill and when I reach about 10-15mph quickly, all the power cuts out and I need to disconnect and reconnect...

Hi, has anyone ordered a Sabvoton controller from china on ebay and had any taxes or customs charges into the UK? I'm just asking as I'm going to order one and it states that it's EU duty free but I'm unsure of customs charges, thanks

Hi, I'm just wondering if a UKC-1 colour LCD will be compatible with this 120a kelly controller? Thanks

Hi I recently posted a thread about a issue I had with my controler I have confirmed it's my controller as when it was connected there was significant resistance on the wheel but when I disconnected it, it was fine. Anyway I'm thinking of purchasing a Sabvoton 150a controller would I have to...

Hi, I was on my way home the other day when my bike throttle stopped responding all of a sudden, when I got home and turned the bike on the motor made a slight ticking noise just once without the throttle applied. When I disconnect the yellow phase wire and turn the bike on the motor doesn't...

Hi, I purchased a anderson to anderson 175a wire so I have a little more length for my battery and when I recived it its very fat wire like 5x thicker than what's on the battery discharge lol I've stripped the wire on my battery and connected the big anderson connector to it and it seems like I...

Hi, my motor is a 3000w 72v kit from solos bikes and I'm running a 60v battery that fully charges at 71.4v, peak Amps is 90a. My controller is 60a so that must mean 71x60=4260, but I get around 8000w when climbing a hill or accelerating is this OK for the motor to run at this power? Also I was...

Hi, I have a 3kw 72v motor kit from Solos Bikes and I'm wondering if the controller is only compatible with the SW900 lcd as I ordered a TFT Ukc-1 display and it all powered up apart from the throttle didn't work, I seen a video on YouTube of a review of the display and some settings that he...

Hi, I'm thinking of buying a stealth bomber frame, front forks and rear suspension as a kit from ebay, its £687, Are they easy to build up and does it require any special tools? Also I will need, handlebars, seat pedals crank etc.. But I have all them, will they fit? And does anyone know what...

Hi, I know this might sound silly but I have allot of wires on my ebike for horn, indicators, taillight, headlight etc.. and I'm wanting to hide most of them, I have tried plastic tubing but I'm not to sure I like it, Does anyone know any good material or anything that can hide the wires that...

Hi, I've just purchased a set from ebay including a rear taillight, break light and indicators integrated, and a front headlight with a horn, All is working fine apart from the break light I have one break with the switch installed that I got with my motor kit But when I connect the break...

Hi, On one of my posts I needed help on why my 3kw motor was rubbing against the frame next to the dropouts were the axle is, My friend gave me 2 of these metal washer things what look like a C not sure what they are called lol But now I have installed those C things on the inside of the dropout...

Hi, I'm having a issue where when I install my 3kw motor and tighten down the nuts the inner part of the rim rubs of the frame near the dropouts, someone told me to add some more washers to either side to stop the rubbing, what kind of washers will I need looking to buy from ebay preferably and...

Hi, I have my 3kw motor setup with a tourqe arm but when I tighten up the nuts on the axle the inside of the hub next to where the dropout is seems to bind and Scrape , so I loosened the nut slightly and I checked it yesterday after riding it for about 2-3 weeks and I could loosen the nut with...