Search results

  1. G

    Spreading Dropouts

    Voilamart 250w 36v rear wheel https://www.ebay.co.uk/itm/36V-250W-Rear-Wheel-Electric-Bicycle-Motor-Conversion-Kit-E-Bike-Cycling-Hub-26/224126208985?epid=22027211542&hash=item342ef68bd9:g:rCEAAOSw93dfJQas
  2. G

    Spreading Dropouts

    thats their new listing 13cm/130mm the one i bought in april is 15cm/150mm.
  3. G

    Spreading Dropouts

    it's a voilamart 26" rear wheel conversion kit purchased back in april (Their new listings show them to be 13cm between dropouts).
  4. G

    Spreading Dropouts

    Looking to change my bike to a new one as i built my first ebike on a old and not great condition bike that i already had to keep the cost down. Having tried a carrera crossfire 2 i would like to buy one of these and transfer the kit but have a couple of issues. The dropouts are only 135mm Wheel...
  5. G

    KT-LCD2, KT-LCD3, KT-LCD6, KT-LCD8, KT-LCD10 replacement button assembly mounting bracket

    Recieved today and fits perfect and feels much stronger than i expected it to and i would say stronger that the original. Once everything is back together you wouldn't notice it had been repaired. I used the same screw that came with my LCD3 and didn't have any issue with mine. Good to hear you...
  6. G

    KT-LCD2, KT-LCD3, KT-LCD6, KT-LCD8, KT-LCD10 replacement button assembly mounting bracket

    No problem i'll cut that off and thanks for letting me have one.
  7. G

    KT-LCD2, KT-LCD3, KT-LCD6, KT-LCD8, KT-LCD10 replacement button assembly mounting bracket

    Hi Dan if you still have any left i would appreciate one for the lcd3 mine is broke on the bend that the bolt goes through.
  8. G

    Battery care?

    Sorry that's what i was asking nealh how he did it.
  9. G

    Battery care?

    Do you have a setup that you can adjust to cutoff at 3.9v or do you just keep checking with multimeter?
  10. G

    LCD3 broken switch

    Thanks if the uv glue doesn't hold then i will look into using a clamp as you suggest.
  11. G

    LCD3 broken switch

    I've got the broken off bit but didn't think it would glue well on the bend but i see from watching youtube on the uv glue you linked to i can build up layers so will give that a go cheers.
  12. G

    LCD3 broken switch

    Switch is broken where it attaches to the handlebars. Is it possible to buy the switches for the lcd3 or just available as a complete unit. If not available are there any 3 button alternatives i could wire up?
  13. G

    Cadence sensor to match crank?

    That's it working now thank you
  14. G

    Cadence sensor to match crank?

    Thanks i'll give that a go.
  15. G

    Cadence sensor to match crank?

    Trying to get cadence sensor/magnet attached to this crank if i use the first 12 pole magnet and place behind the nut there is no thread left to put the nut back on, if i place it on this side of the nut i can't get it to sit properly has a major wobble so the sensor would only pick up maybe...
  16. G

    petition to increase the speed limit

    I don't see why changing the speed to 20mph will affect Lie-A or L1e-B as they are still significantly higher.
  17. G

    AKM-100SX 36V250W Front 201rpm vs 328rpm

    Thanks for the heads up i've lowered the output to just under 15amps on my controller and find it's got more than enough power to get up hills for me normally at assist 4 for the steeper ones. Feels like 3 or 4 times the power of my first voilamart kit with 36v battery.
  18. G

    AKM-100SX 36V250W Front 201rpm vs 328rpm

    Thanks everyone i will see what he goes for later tonight but between AKM-100CST and AKM128CST. He did have a go on my bike which had AKM-100SX 36V250W Front hub & 48v battery which he was more than happy with and would assume the 100CST would perform very similar?
  19. G

    AKM-100SX 36V250W Front 201rpm vs 328rpm

    I am guessing he is about 13-14 stone so i'll try and get him onto rear hub AKM-100CST Cassette 36V250W
  20. G

    AKM-100SX 36V250W Front 201rpm vs 328rpm

    Got the rest of the order coming from topbike kit and already paid so would be easiest if i could get a different one they supply. The AKM-75SX 36V250W seems to be the closest to the 100sx front hub motor but i can't see any real difference apart from weight of the motor