Search results

Sorry for the slow response, I have not yet put the order in because I had a terminal disaster on my hand bike. I snapped the frame! So I will hopefully get this welded over the next week or two and then look at ordering the relevant parts from China. Again, sorry for my slow response and here’s...

Noted. I have typically used the powe on/off button for any issues such as the aforementione. It’s very nicely placed and in easy reach. I was presuming the ee screen I specc’ed would have an associated power on/off button? If not then I will definitely need a kill switch!

Ah the H was consumed in the summer post that ride, the latter photo was in December just gone, after discovering a new trail off an old railway line, that was followed by a bacon sarnie and obligatory coffee! thanks so much for the extension cable info, that’s idea. I’ll update the spec and...

Brilliant, thanks for this. My issue is the display is , in essence 1metre away from the thumb throttle due to the type of handbike I own. If uou look at the attached phot closely you can see the display on one handlebar and the throtttle on the other under the gear selector.. The controller box...

Thansk! I’ll need to extend the connection from the controller to the motor, the display and throttle. I was hoping I could Purchase extender cables to fit. s everything else is ok, just the; throttle extension? Battery is suitable? Can you advise on the cable? thanks as ever. I’ll just have...

thanks for the information. I have decided not to bother getting a replacement battery and just go for a totally new setup, as close to a “plug and play” system as possible. It seems your can’t get a decent battery in the uk with a reasonable amount of mAh at the moment that is a dolphin type...

Thanks for the info, I’ll order some appropriate grease and follow the instructions (Then report back on it). I cannot thank you enough with regards to all the advice and£ information you’ve given me. I’ll be ordering a battery first thing Monday and then spec a new controller/display. My...

I have no clue if it is current or speeed controller. I have seen it at 700w in PAS1 when going up steep inclines for certain. However it doesn’t typically go much last 300w when in false flats or general use. the motor noise is sounds more mechanical, typically after 30minutes use. How do I...

Hi Ben, thank you for pitching in and assisting. I find the dual battery setup fascinating and that PAS3 is more economical, it’s definitely what I would like to to long term. especially if it uses less battery which means the range I can travel will go up! Also thank you for the info on the...

Thank you for the information, my feeling is to stick with the current hub, it gets a bit noisy after half an hour but would be a,lot easier than trying to source a 24” hub/wheel without having to get a hub laced to a rim. The idea of going for a substantial controller and costly battery...

the only writing/info on the hub is on the attached photos. I’m more than happy to take more from other angles is required?

Firstly to all, thank you for the information and advice. As I could source a battery rather quickly and this one appears to be on its way out, it seems like a ‘quick fix’ would be to get another battery for my current setup. I could have the battery delivered within a few days allowing me to...

Thanks ever so much! I will spec up a controller etc this coming weekend. Either way, it appears that you expect the battery is the current issue with the setup I currently have on the bike? So with this in mind, first thing is to replace the battery like for like. I just don’t want to pay for...

I’ve had a look through the advanced settings within the lcd, there is nothing that offers a mode switch from current to speed control. The only offering is wheel size and I would presume that is to do with configuring the km/h display an accurate read. The advanced setting menu isn’t very...

Oh and if required, what controller would interface with my current setup in order to have a ‘current control setup’ opposed to a ‘speed control setup’. Please excuse my lack of technical terminology/understanding. I’m currently reading a lot of posts on the forum to try and seek knowledge as...

I semi understand/get the gist of what your saying and thank you once again. I will endeavour to get a readout whilst cycling and report back in due course. with regards to the PAS vs w load in each PAS level. Is there a way I can reconfigure the controller in order to make best use of this...

Photo of battery attached

Thanks for the input. The battery label (see attached) indicates it’s a 36v 1300mAh battery. is the likelihood the battery is at fault opposed to the controller then? Obviously the controller is relatively cheap to replace comparative to the battery albeit I’m happy to replace whatever is...

Hi there, I've just checked (so that’s 16 hours after first test) and the multimeter indicates 41.0v.

Ok great, just checked again and holding steady at 41.1v. I’ll check again in the morning. Thanks as ever