Search results

  1. K

    Help! Brainpower 866C-6

    Got it all working today. All I did was disconnect the brake connectors and reconnected 1 brake and tested it and it worked as it should. I then connected the 2nd brake and it still works. HAPPY DAYS Remind me what you do when connecting the light? Cheers
  2. K

    Help! Brainpower 866C-6

    You were right. after removing crank arm and a good clean 5 x magnets have appeared.
  3. K

    Help! Brainpower 866C-6

    Agreed, but what is confusing me is in the pictures attached my pas and a picture of a new pas and mine just has holes but the new one has what appears to be magnets in the holes?
  4. K

    Help! Brainpower 866C-6

    Got it working now thanks. can you offer any information on my Pas sensor in the pictures? I have no magnets just holes in the disc? Is this normal or have the magnets been lost at some point?
  5. K

    Help! Brainpower 866C-6

    can anyone help?
  6. K

    Help! Brainpower 866C-6

    I have this working but just a few pointers required. I have had the 2 green wires connected but not carried out the full self learn mode but the wheel does spin correctly. After this procedure do I disconnect the green cables? Also my pas sensor just seems to have holes in it. Should there...
  7. K

    Help! Brainpower 866C-6

    Great thank you.
  8. K

    Help! Brainpower 866C-6

    Thanks for your reply. The throttle is just rigged up temporarily to test it. I get the motor going using the controller then when I use the throttle the motor stops ‍♂️ PAS is the pedal or crank sensor? EABs for direct drive? I will need to get hold of the set up self learning procedure.
  9. K

    Help! Brainpower 866C-6

    I have it working of a fashion but not properly.
  10. K

    Help! Brainpower 866C-6

    Hi sorry for delay getting back I’ve been away with work. See attached pictures of the unit I bought. This is a early freego bike.
  11. K

    Help! Brainpower 866C-6

    Hi does anyone have the cable identification for the above controller? I bought one for a Freego bike to replace a faulty controller.