Search results

Hey all, Appreciate that VESC's are usually in the eBoard domain, but thought it interesting to take a punt on a MakerX 75/100. Though dead silent. The acceleration is way behind the kunteng's despite following multiple instructions, setting up a thumb controller and understanding the basics...

hi, so tested the parameters and definitely right at the top of the limit for he speed (72 kph) and setting 5 for the power (throttle used only with imitation torque... I was thinking (and have primed the KT controller ith the soldered pins, today) for a custom firmware / flash... but cannot...

Hmmm... Thanks @vfr400 I will check that out... but are the limits held on the controller or the display (KT-LCD8H)? as they are 72kmph and speed setting 5, so technically should ot be "hindered" but might try a factory reset, as wondering if the parameters could get stuck/confused? Thanks!!

Hi All, So I made a slight faux pas and purchased a KT Controller 45a (36/48v) - SVPRK-SL02G that had some very small "print" on the page that said it was not suitable for scooters, and was wondering why this may be the case? I have not quite managed to get it working with the optimal settings...

BREAKTHROUGH!! so, was a mix of (my own) crappy wiring, and a funny old throttle (may have been a 36v on a 48v) But... The bat scooter fired up and ran tonight (really well, actually!) I bought a universal twist throttle and with some mild tourettes, the throttle registered and ramped up and...

Hi all, First off, good to meet you all and this is my first post as a new user on this forum, and hopefully many more to come! I have recently embarked on a custom scooter build, for my son, who, affectionately calls it, the "Batscooter" using parts from an ebike which have been sourced...

Hi All, Hope you are all well. This is one of my first forays in getting dirty with ebikes and escooters, so happy to say first and foremost that I'm broadly a complete beginner at all this, so please excuse any obvious errors or omissions that I've made in advance. I'm currently stripping...