Search results

spoke holes on hub have gone oval and not sure if normal wheel can be used with sprocket on both sides as the hubs with the screw on disc is a normal right hand thread and would undo with the rotation of sprocket if that makes sense.

Urgently required a 26" rear wheel for the above does not need motor, can not find one anywhere for sale on internet at present

You have a pm.

Thank you all for your comments I shall look for a replacement

Hi all, I have a powabyke lithium battery case. The water bottle style early one 36v 6 or 8 amp. My question is does anyone re pack these on this forum or company anywhere so I could send it to get done. many thanks in advance Fatts

I remember falling off one of those at full belt. my finger is still out of shape, as when I rolled over it was pointing forwards and bought me to an abrupt stop. I still have the bits to fit into another bike. I must hunt them down and look for a new rim.

Do you still have the motor for sale?

Hi Julian, You have a pm.

You have a pm

Cheers for the bike Paul and a thank you to your partner for the food and coffee. I have just got home but been out playing on it for a short period. again many thanks. Fatts

You have a pm

Just a note on the Raleigh shoppers fork spacing 90mm, wheels are 28 spoke and 451 mm rims ( 20x 1 3/8 instead of the more modern 36 spoke 406 mm rims ( 20x 1.75). The head stock has a nylon bush instead of a top bearing race and handlebar stem dont removed till the bolt at bottom of the yoke...

Hi, Thanks for the info. The bike was making a whirring noise sometimes before taking up drive. I checked and changed the 4 bearings and before I assembled it I found out from my friend that she took her boyfriend on the back up a steep hill outside their house without taking a run up. Its one...

Hi all, I am looking for a clutch for the above I am not sure of the hub as dont have a number on it. The clutch has the number HL1108 on it and it come off a byocycle chamelion about 2 yrs old. I shall look further when time permits to see if I can find what hub it is. Does anyone know where I...

Let me know what you want etc send me a private message Fatts

Hi All, I have posted before with this problem I am having on a tricycle I am electrifying. Details of problem Wheels turns slowly can be stopped by hand. Parts in use Old powabyke brushed front hub in use new controller new throttle ( hall effect ) 36v sla ( 3 x 12v 12a batteries ) Automotive...

Hi OldBob, I shall give you details of how I wired it I do not have pics. The wiring code from controller was translated by a tiawanese friend for me as it was in chinese.Speed limiter black and black, brake yellow and black, throttle red+ black- blue signal, power thick red+ thick black- motor...

Tried throttle and another also a new controller of same sort still just whirrs slowly round when turn throttle.

Battery is 36v 12ah. Sla Throttle colour coding appears ok but I will look again when get chance it could be that but I have tried another new throttle on it with same results

Hi, thanks for your reply but it has throttle only no pedal sensor mode.