Search results

  1. O

    Strange Pas problem

    I think i have a setting somewhere that needs changing on the LCD8H. Bafang 48v Swx02 from Woosh KT LCD8H Everything was working fine with the KT 15a controller. PAS worked fine in one direction. I changed my controller from a 15a Kt controller to a 17a KT controller. I checked the settings...
  2. O

    First time wheel build

    I have trued a wheel twice now using the wheel in drop out method and zip tie. This has worked well for me. I have always wanted to build a wheel as i found the truing exercise pretty relaxing, it took a few hours but i was in no rush. I also changed a few spokes a while ago with the help of...
  3. O

    Battery cuts out

    I have a small 48v 7ah battery. A KT 15 amp controller. I normally use assist level 2 and level 5 for a 10% hill that is about 300 metres long. I had done 16 miles in total and the battery voltage was showing around 44-46v on the lcd8. As I got on the 10% hill and switched to assist level...
  4. O

    Controller Temperature

    Finally got my test bike on the road. Previously i have only ever had a Woosh SWX02 kit, never noticed the temperature of the controller as its built into the battery. However my new setup is as follows KT 15a controller 48v 7ah battery 36v 250w bafang hub labelled G020.250 36v Bafang - no...
  5. O

    LCD3 and Bafang settings help please

    Hi I have a spent a few hours on the settings of the KT LCD3. Searching the internet trying to make sense of it all. I have the following kit Bafang G020.250 code 13 27.5” wheel 48v 7ah battery KT 15a controller Push throttle I will add a pas when I get a chance. I have set the wheel size...
  6. O

    Dishing, centering of wheel and drop out widening

    Hi guys To get the rear hub motor wheel to fit centrally in the frame I need to add 10mm washers to the non drive side. Firstly I’m pretty sure stretching the dropout 10mm on one side won’t cause the aluminium frame any issues right? Secondly doing the above moves the brake calliper away...
  7. O

    Controller question

    Hi guys I have seen a controller from pswpower. The cables look a bit different to similar controllers. Please see picture with the circle. What are the two pins for? Where are the power wires? Second photo is of a similar controller but has no 2 pin cable.
  8. O

    Help! G020.250 controller?

    Hi guys I have a 36v G020 250w. I believe also referrred to as a SWX02, am I right? The motor is laced into a 27.5 wheel. I believe the motor is a code 13. Full code from wheel is as follows. RM G020.250.DC 13. Which kt controller do you recommend for this? 15a, 17, or 22amp? Any links...
  9. O

    Spokes

    Hi Following on from my previous thread in identifying a rear hub. I have a few missing spokes. I removed one to measure it. Can someone please confirm the correct length I need? Thickness? Nipple size? Where to get them from? I have no clue about spokes. I know they are j bend and have a...
  10. O

    Help identify hub motor

    Hi guys Can anyone help identify what rear hub motor this is? It is a Bafang with the following numbers printed on it. Bafang BFY1801H15240-1 Googling does not bring up any results. Thanks
  11. O

    SWX02 to Q128h

    Hi guys I currently have a wooshbikes SWX02 kit fitted to my bike. Happy with it, no issues. Motor is currently mounted on a 700c rim. What i would like to do is get a 27.5 rim with a motor so i can have more tyre clearance. The kit i have has the following... Lishui 48V 17 Amps sine-wave...
  12. O

    Rear hub questions wooshbikes

    Hi guys Sorry a bit long winded but need some advice. Great forum, read and learnt lots. I been riding bikes on and off for years. Pretty proficient in fixing just about anything on a bike. I have a couple of questions. I commute 10 miles each day. Not a great distance but two big hills...