Search results

Sorry wrong photo thats the current controller should have been this one, if anyone knows where to get one.

Thanks for the information I’ve just seen another controller which has the correct plugs so maybe this is a better option than risking getting it wrong.

Hi guys after all the great help in my previous thread I though I would ask again before doing something wrong. I’m running voilamart 1000w rear drive, the kit came with a twist throttle with nasty little built in display, I have a SW900 LCD to fit and thumb throttle but wiring not looking...

Quick update and big thanks for the help, I filed the dropouts down about 4mm the axle dropped in nicely, slow going but wanted a snug fit. Both torque washers modified so tabs were 90 degrees and two torque arms fitted. Test ride and full check over then a 2 mile ride and all seems ok. Just...

Thanks I'll keep you all updated.

Maybe I’ll try this and go the geared option later.

Yes just looking it doesn't look like much to to spare.

thanks I found the torque arms you suggested from Hammer ebikes, will get to work on it and report back, thanks again.

Thanks for the advice just ordered one

Not at all I‘m grateful for the advice being new to this, glad I joined the group its been refreshing to see how many people happy to help out.

Good point I didnt think of the brake issue, filing it is then. Thanks for the advice.

Ok thanks for the advice I guess I am ordering a decent file then at least its aluminium so a bit easier to file.

Thats good news I will try the torque arms first as I really don’t fancy modifying the frame if I don’t have to. The drop out slots did look shallow but I wasn’t sure.

The axle is 210 x 10 according to the manual, what are 14 x 10 T/A’s excuse my ignorance.

It literally came straight off so the wiring looks ok. Wow I wasn’t prepared to start modifying the frame there doesn't look like there is much to file its so thin anyway.

This was the set up I had which I thought was correct ?

Just ordered two so hopefully that does the trick.

Just been looking at torque arm kits on Amazon as nothing was with the kit, do you think this is the issue.

Yes i fitted the washer with a tag which slots into the drop out on both sides.

Looking for a bit of help please, just finished fitting 1000w rear drive kit to Carrera Vengeance MTB. All went pretty smoothly, tested it on the ground and all seemed ok. As soon as I put the bike on the ground and hit the power button the rear wheel immediately jumped out of the frame, after a...