Search results

Cannot thank you enough for all your help. We will now follow through on your last message and let you know how it all goes. Will check the motor cable but visually it looks ok. Thank you for the controller link too.

Sorry - Yes we do have 5v between the red and black wires on the 5 way connector. The next bit - The voltage on each of the blue, yellow and green wires, while rotating the wheel slowly backwards does not pulse at 5v. There is voltage there - 0.2 - 0.3 but not pulsing.

ps - we do have ether 5 wire connector to the motor.

Hi We have now carried out all 6 of your tests hopefully correctly. Everything seems to check out ok apart from test 5 - the motor halls signal wires. The voltage does not pulse when rotating the wheel backwards - it just increases the faster you rotate the wheel up to a max of...

I haven't shown hubby all these posts yet so nothing ordered yet.

Thank you very much for all this information - we now have much cheaper options to explore. Will post again when it is sorted. We cannot thank you all enough for helping us.

WOW! Thankyou so very much - this is a very thorough reply - I am sure hubby will also be very grateful when he returns from work.

Sorry forgot to reply to your question. Hubby was an engineer in the aviation business (Flight Refuelling) but not electrical. He has been watching numerous videos on the internet and tested numerous connections including one that gives resistance in the rear wheel possibly suggesting that...

The £185 was for a DIY kit! Apparently easy - plug and play! Hubby is also convinced its the controller and although you cannot get a direct replacement for the Freego one, he is prepared to spend out for one (£10-£30) and work out where all the wires go. Thank you for your help.

Hi cyclebuddy. I am not very technical so probably didn't explain this very clearly. But hubby did disconnect brakes and throttle cables and then tried to start bike but no luck. Several people have thought that something may have stuck but we just cannot find anything obvious. We have now...

Thankyou Lancslass and vfr400. We have done everything you have said and still no drive. The LED display is working fine and we disconnected the brakes in the pod just beneath the handlebars and reconnected but no change. The motor connector has also been disconnected and reconnected to...

Hi. My Freego Hawk was cycled up a fairly steep hill out of Dartmouth. I physically could not cycle it so pushed it up the hill using the throttle. I stopped for my hubby to catch up and then suddenly my bike had no power/drive to back wheel. The LED display panel is all lit up and lights...