Search results

Thanks, the green connector connects to the LCD, the black 9 pin connector is the only one without a mate so assume that is for the PAS. I will order the kit from the link you shared (including the LCD) and will pass on the current LCD, thanks again for the time and input

Photos below, there a 4 cables from the controller 2 larger power cables (1 to battery, 1 to hub) photos of the other two connectors are attached Nothing I can find on Google for a standard PAS sensor matches (most have the yellow plug end) and the only Torque sensing ones I can find are Bafang...

So this is now turning personnel and I am more motivated by beating the bike than actually needing it working. Good news is after some searching finally found the controller in the down tube and it appears to be a KT (model KT36SVPR-CK02) which I guess is why the display worked and it looks...

Don't know the bike was picked up by my dad at an auction and the display and bottom bracket were both missing, the controller on it I found on ebay and took a chance as it looked the same as the photos of the bike I found on google. I'll get the controller out tomorrow and see where that...

Managed to find a review which confirm its a Torque sensing PAS (which probably explains why it was missing), so the fun continue :)

Thanks for the response, enjoying the challenge of trying to resurrect the bike, but as the bike manufacturer are defunct documentation on the model is impossible to find Again thank you so much for the help, there is no silver box so guess I'll need to take the battery out again to find the...

Seems I keep digging up this old thread - So I managed to find a local company (DMC Battery replacements Glasgow - highly recommended great service) who re-celled my battery for £180. Connected to the bike and everything powers on ok. The battery is installed and charges fine, the controller...

Not had any luck yet, removal of the battery is a bit of a pain (assuming I didn't find a harder way to do it) I had to remove the silver plate at the front and then take of the front forks to get access to the battery Do you have a charger? , If yes could you confirm the power details and size...

Its not something I had considered, bit I will try getting a charge into it first and if it is dead will probably give this a go (after I do a bit of reading)

Dont know if it works yet, its certainly been flat (or dead) since its arrived, will take a photo of the charging port when i get home from work, only thing I have found on-line are sales listing which list a 6.8Ah LI-ON battery. Worst case I have an ok (if a little heavy) bike for short journets

Hi Everyone, based in Glasgow, relatively new to E-biking and currently riding an old Cube mountain bike fitted with Swytch kit (and also trying to resurrect a Vitesse Signal for the wife), enjoying it so far and trying not to look at the shiny new bikes until I prove I am going to stick with...

Sorry to resurrect an old conversation, but I have picked up a Vitesse Signal (via auction) and the bike has come without any documentation or charger, does anyone know the charger make/model or the correct voltage so I can source an alternative?