Search results

  1. S

    24s Kraken - Spares/Repair

    Bump :)
  2. S

    24s Kraken - Spares/Repair

    I owned built and owned this until last year where it was sold. Since then the motor has been cooked and controller shorted (fets) I had been asked to repair it, but due to the faults the owner has decided to sell. 24s 10ah lipo...
  3. S

    wanted stealth bomber or hommade version

    Build one. DIY frames are dropping to around £500 MXUS Motor Laced - £300 Controller - £500 Battery Pack - £350 The rest of the bike can be built to your budget. .. previous builds of mine http://www.pedelecs.co.uk/forum/threads/kona-stinky-uk-mxus-adaptto-20s-19-pro-wheel.20818/...
  4. S

    Vectrix VX1 - Scooter

    Bump before listing on Fleabay.
  5. S

    Vectrix VX1 - Scooter

    LEAF conversion http://www.myelifenow.com/2014/04/the-leaf-modules-based-vectrix.html
  6. S

    Vectrix VX1 - Scooter

    £100 for CBT £50 helmet, I possibly have a spare. £114 insurance (that's what I paid) You can do an A1 test after on the Vectrix after if you wanted so you can continue to ride this without L plates. The test is £20 in a DVLA off road test centre, it's easy. Replacement batteries come in the...
  7. S

    Vectrix VX1 - Scooter

    It is a 2007 model that has only covered 1242 miles from new. I bought it from a Vectrix dealer who used it travel around his gated holiday estate. This is in absolute joy to ride, especially with the twist regen on the throttle. I have upgraded the software to Lairds version which has...
  8. S

    Kona Stinky UK - MXUS, Adaptto, 20s, 19" Pro Wheel

    Thought I would mention charging in a bit more detail. The cells are managed by the Adaptto Battery Management System. The system is fully customisable using the display; seeting LVC + HVC, monitoring the cells, capacity limits etc. The cells have been well cared for as you can imagine, and...
  9. S

    Kona Stinky UK - MXUS, Adaptto, 20s, 19" Pro Wheel

    Kona Stinky Large Frame Custom designed/machined Torque Arms Custom deisgned/machined battery case Pro Wheel 19” JRH rims 2.5” x 19” matching tyres Shimano XTR hydraulic front brake Hope rotor DMR Convertible hub laced with 13g JRH Sapim spokes and matching nipples MXUS 4t laced with black 12g...
  10. S

    FS: Charger EMC240

    Bump
  11. S

    FS: Charger EMC240

    Bought and only used once. 240w charger. Was bought to charge a 12s lipo setup (50.4v from memory). £35 delivered.
  12. S

    BBS02 + 12s Lipos 44v/Charger Full Setup - UK

    Reduced to £400!
  13. S

    Repair my motor

    Heat shrink would leave a neater finish.
  14. S

    BBS02 + 12s Lipos 44v/Charger Full Setup - UK

    Reduced to £450!
  15. S

    Bafang BBS02 Programming Lead - UK

    Apologies, I do not have anymore of these for sale.
  16. S

    BBS02 + 12s Lipos 44v/Charger Full Setup - UK

    As new and in very good condition throughout, see the side of the motor, still has the plastic film on it. Turnigy 12s 5ah lipo BBS02 Fitting tools Triangle bag Bulk charger This is a plug and play system. Everything has been done for you, the battery connections connect with EC5 plugs...
  17. S

    Lyen 12fet 4110 fet - Modified (EU)

    Lyen 12fet 4110 fet Extreme Modder. No case. 14cm x 70cm x 2.5cm Max voltage 100v (24s lipo) Max amps 45amps Comes with programming lead. Upgrades 12awg silicone wire on Power Leads 10awg silicone phase wires Silicone hall sensor wires (unterminated) Plug added on the ignition wire to add a...
  18. S

    HS3525/Halo Front+Rear Wheel 24" + Hookworms

    Minimal use as you can see and well looked after, GT85 applied on a rag prior to most uses (and on most of the bike!). I have installed a temp sensor which was used with a CA-V3, then 50 miles on an Adaptto Mini. This does not have the stamped stator but the more desirable cast stator. The...