Search results

We pull a YakBob trailer when we tour in France. We have an Ezee front wheel kit 36v 15ah battery fitted to a Thorn expedition tandem with filled panniers and the trailer filled with camping gear. this is a heavy combination also we do pedel all the time. But no problems, carried a spare battery...

2nd part. It is an Ezee 36v 15 amp .I still have key switch,case and bms. I think new cells are called for. Any suggestions would be good. Keep improving and I look forward to hearing from you. Peter

Good evening Paul, thank you for your e-mail. It was a suprise to hear from you but I am pleased you are feeling better and that you are getting into harness again. I still am wanting to source a replacement for one of my Ezee batteries. They are flat cells and I have taken the defective one...

Hi, We have a tandem equipped with Rohloff rear gears. Use an Ezee 250w 14amp carrier battery, front wheel drive.You can easily covert to 350w power, ( up from Hay on Wye on the Longtown road pedelling as well). We cycle tour in France pulling a Yak Bob trailer and its great for assistance...

Thanks John

Thanks John, that's an idea, I would have to move the controller forward as well so it looks like I will be in the market for a battery plus some connectors as the wiring will need to be shortened and I hope Monica will willingly give up the throttle.

Yes it's a Rohloff hub, I suppose I could really screw in the two setscrews to pierce the eccentric whether the motor would still rip it out. I(we) only use the front hub to give some assist up hills or into hard headwinds and when touring pulling a 'bob' trailer which is no problem. I suppose...

Thanks 'anotherkiwi'. I will have a word with Woosh nearer the time, I may use it in my tourer.

Hi All, Thinking about fitting a crank drive to my Thorn tandem. It would go into the front eccentric housing. If anyone has done it has there been a problem with twisting the whole assembly under load. I have a front wheel drive at the moment but a crank drive would be easier when splitting...

Hi funkylyn, Just been told to contact you to see if you have any info. on 'morphix'. I have been trying to contact him about batteries but to no avail. Peter

Good morning all, Has anyone had news of 'morphix'. I know he has been unwell recently but was hoping he is up and running again. I have tried contacting him also tried the commercial setup but to no avail. Peter

Been trying to contact Morphix but website will not load and cannot find email address. Any one help please. I have stripped the battery pack, just hope if I re cell, it will all go back together ok.

OK

Thanks again. I will e-mail morphix and see what he has got.

Thanks d8veh, the cells are flat 220x60x5 mm

Thank you gentlemen, it's roughly what I expected the answer to be. I assume all the cells would need replacing, where would I access them if I went down that route. I take it the bms can stay.

We have a 21/2 year old Ezee 36v 10amh battery . Used fairly lightly for occaisional assistance by my wife.Terrain is undulating with a couple of steepish hills. Charge every time after use. (16 to 20 miles) Recently going up the steep ones, pedalling as well, the battery lights go from green...

I may have missed someone pointing out but this months CTC magazine has another article on the pros and cons of wearing helmets. I'm under no allusions that me, wearing a helmet (which I do always) will protect me from ALL accidents. Sorry John to carry on, can't help on setting up a poll. Pete

Depending on the front forks, if they are too slender a disc can snap them, seen it happen. Pete

Hi Jerry, I notice that Ezee suggest 35Nm. I could torque mine on the nearside but can't get a socket on the offside due to the cables, guard preventing it. I suppose there could be an openended torque bar out there somewhere, like you I do mine by feel until I can't move the spanner and I put...