front hub

  1. K

    Bafang FM G070.250/350/500.D also know as H610

    Hi, I have some interest in the hub motor in the links below but can find very little informations and owner's feedbacks are almost non-existent. Seems not a popular hub. Did it flew under the radar ? It is also known as H610 and it seems to use beefy nylon gears of 55mm by 12 mm. However I'm a...
  2. C

    Review Small, light, reliable, low resistance FRONT/REAR hub

    Hello, I would like to convert second bike to an e-bike. I am looking for a small, light, with lowest resistance front or rear hub. Once I had and tested front Xiongda 1,5 kg but high resistance and then AKM Q100 2,1 kg which was quite good (low resistance - freewheel 25-30 sec) but it could...
  3. F

    Having a front hub motor and a rear hub motor on the same bike ?

    I currently race around the place on a 2020 Carrera Vengeance E-spec which runs off a Suntour rear hub motor. Although this is fine for me the options for upgrading the current Suntour HESC system are next to none without some serious overhaul. Id love to be able to have a throttle and the range...
  4. R

    Carbon forks - Specialised Crux E5 - Front hub 250w

    I need some advice. My cyclotricity 250w front hub conversion kit is on its way to me, and I've been searching for steel forks to swap out on my Crux E5. It's proving very difficult (for a n00b like me) as Specialised don't seem to make swapping out the fork particularly easy. So I have a few...