hall sensors

  1. D

    Help! BLDC motor does not rotate in opposite direction

    Earlier whenever i used to reverse my ebike manually it used to not give me a drag but but after checking it for any issues using the ebike testing device, I taped all the wires together(I guess shorting all of them in the process). Now i think i have a issue where it is giving me huge drag when...
  2. H

    Help! E-Bike Hall sensors keep blowing

    Hi, I’m new to the forum and was hoping for a bit of help with my ebike. I own a B52 stealth bomber and have had numerous problems after around a year of owning. I somehow burnt out the crystalyte motor which I took to an ebike shop who replaced it with a qs 205 3kw motor. The repair seemed a...
  3. J

    White Hall sensor issue... desperate for help!

    Hello any help on this matter would be so much appreciated.... I have two Chinese bikes; pretty much identical. One is throwing up an E07 error (motor error). so on the advice of this really helpful forum, I have replaced the middle hall sensor with a ss41 hall sensor on the motor after I found...
  4. N

    Help! E 07 error shown - Excelvan Ebike

    Hi everyone, I am (or actually my girlfriend is) the owner of a Chinese ebike that I bought on eBay. The bike was running fine, with her weight she managed to reach about 23 mph which was a really impressive speed for such a tiny machine. Once she has told me that she hit the pothole and the...
  5. N

    Help! E 07 error shown - Excelvan Ebike

    Hi everyone, I am (or actually my girlfriend is) the owner of a Chinese ebike that I bought on eBay. The bike was running fine, with her weight she managed to reach about 23 mph which was a really impressive speed for such a tiny machine. Once she has told me that she hit the pothole and the...
  6. Andrew Wingrove

    Hall Connector

    I have two Raleigh Velo Cite bikes, both of which were bought from the same dealer at the same time. So I am told by the person I bought them from. They look identical, and I have found something missing on the controller for one bike. There is no HALL connector on the controller. They both...
  7. T

    Colour of phase and hall sensor wires. Is it standard?

    I'm hoping someone can help with fitting a new hub to my existing setup. (i.e. without replacing everything) I'm disabled and ride a wheelchair with an add-on powered front wheel that turns it into a trike. (To be recommended, I can now get out with the rest of the family). The 'but' is that I'm...