Any help with this kit please

[peter.c]

Can anyone help with this its possible a pedal ease fat bike120mm kit

 

[peter.c]

Could it be a bewo?

 

[vfr400]

It's the crank motor from Tianjin Motor Company in China. It's also sold under the brand Bewo. It has the advantage that you can use any controller with it with or without a throttle.

 

[peter.c]

Thanks for the info purchased to finish off the garage fat bike stock

 

[peter.c]

any clues on the display settings got it new oldstock new play -thing/toy

 

[vfr400]

Before anything, take your cranks off and check that the shaft fits through the bottom bracket tube and reaches far enough through to get the arrangement on the other end on properly.

 

[peter.c]

Yes suspected it might be a problem but its a 120mm shaft

 

[Nealh]

any clues on the display settings got it new oldstock new play -thing/toyView attachment 42701

Users Manual-KD21C-KDS.pdf (key-display.com)

 

[peter.c]

Thank you for your help

 

[peter.c]

Got round to fitting this today up running 48v needs finishing touches then test ride tomorrow

 

[peter.c]

Rides well a very smooth power delivery no super human effort required, very pleased as it runs with a very high torque on 48v, the motor is tiny and the separate controller and small simple display are a bonus