Bafang clutch

[Tortus]

Hi.
Can anyone tell me if I can get a clutch for this motor please.
Its off a Carrera Crosscity, Bafang 250w rear wheel.
Ive looked everywhere (I think)
Please help if you can.
Thanks.

 

[Nealh]

What is the teeth count of the two stages .

One needs to define the actual hub model number.
Though the clutch say's G110 250D , there is no such hub model number.

One could send a pic of it to Topbikekit to see if they can supply a clutch.

 

[Nealh]

One is likely to find it nigh on impossible to find them for sale.

 

[Tortus]

Thanks for the info, I need to remove the clutch part to count the splines. I will try and borrow a 3 jaw puller this week and count them and get back to you.
Thanks.

 

[Tortus]

If I cant get one is there anyway I can fix it, maybe soak it in degreaser that's if it is not mechanically destroyed inside.

 

[Nealh]

What's wrong with it ?

 

[saneagle]

If you can build a wheel, you can get either a MXUS XF08C or AKM100SX motor complete from PSWPower for not much more than what you're going to pay for just a clutch. The XF08C id 280rpm at 36v and the AKM 100SX is 201 rpm at 36v. They list it with an easy-peal label as 350w, though nobody would believe that it is 350w because of its small size.

 

[Tortus]

The clutch turns both ways. I thought they would only turn the way the arrow points.
I bought it 2nd hand and when I tried it out there was just an awful noise from the motor. I thought the nylon teeth had stripped but they are ok.
I have watched a youtube video of a guy (Grin technologies) who welded the clutch so it did regen braking.

 

[Tortus]

If you can build a wheel, you can get either a MXUS XF08C or AKM100SX motor complete from PSWPower for not much more than what you're going to pay for just a clutch. The XF08C id 280rpm at 36v and the AKM 100SX is 201 rpm at 36v. They list it with an easy-peal label as 350w, though nobody would believe that it is 350w because of its small size.

Thanks I will have a look.

 

[Tortus]

If you can build a wheel, you can get either a MXUS XF08C or AKM100SX motor complete from PSWPower for not much more than what you're going to pay for just a clutch. The XF08C id 280rpm at 36v and the AKM 100SX is 201 rpm at 36v. They list it with an easy-peal label as 350w, though nobody would believe that it is 350w because of its small size.

I don't think I could build a wheel, never done one before.
Cheers

 

[saneagle]

I don't think I could build a wheel, never done one before.
Cheers

That's the same as many other guys on this forum, but we all had a go and got success - very satisfying! I've built about 20 wheels now. I do it on my lap while watching a film.

 

[Tortus]

What is the teeth count of the two stages .

One needs to define the actual hub model number.
Though the clutch say's G110 250D , there is no such hub model number.

One could send a pic of it to Topbikekit to see if they can supply a clutch.

I have sent them an email with the pictures, fingers crossed.
Thanks for the info.

 

[Tortus]

That's the same as many other guys on this forum, but we all had a go and got success - very satisfying! I've built about 20 wheels now. I do it on my lap while watching a film.

And who said men cant multitask!