Bosch CX error code 530

Bearing Man

Trade Member
Oct 3, 2018
115
149
59
Hampshire
www.ebikemotorcentre.com
Normally, you can just take the plastic cover off the left-hand side of the motor and pull the power plug from the motor. You should be able to get enough slack to lift the battery plug. (You will have to release the little locking tab on the side of the motor power plug before pulling it from the motor)
 

SanSan

Pedelecer
Aug 9, 2019
27
-1
I'm having this problem. How did you get at the inside of the socket? I got the plastic cover off but it looks like I need to remove the motor to create slack to pull the socket up and out to check its connections?


I'm having the same problem. How did you get at the underside of the socket? I managed to take the plastic casing off but it looks like you have to take the motor off to create enough slack to pull the socket up and out?
Check the underside of your bike frame beneath the battery holders, there maybe a hole or hole with a grommet as there is on ours.

PS we solved the problem with some 3mm firm sponge between the battery and frame.
 

Advertisers