Bosch Nyon Left Side Control unit

[bigclick]

So I think its an age thing but I keep having scrapes lately....

The latest was surging up a steep bank in the local arboretum and the wheels span out... I fell forward and hit the handlebars. Besides a big bruise on my gut I also noticed the control pad on the left side of the handlebar was loose. When I got home I realised the hinge part of the bracket had smashed into about 4 pieces.

I dont seem to be able to disconnect this from the connector pad in the middle of the handlebars, can anyone help me out?

I am hopeful I dont have to buy the whole ensemble down to the motor :-(

 

[Wander]

There's some pictures here which suggest that it goes to some sort of connector. There seems to be about 4 different types listed so make sure you get the right one.

 

[bigclick]

There's some pictures here which suggest that it goes to some sort of connector. There seems to be about 4 different types listed so make sure you get the right one.

Great thanks, that tels me its possible... not sure about that square shaped termination though :-(

 

[Wander]

Just noticed you said Nyon so found the Nyon one. Clicking on the photo it looks like four screws might hold it on?

 

[bigclick]

I might just get the Intuvia control and swap the nyon display display, the technology has been quite a dissapointment as well as being more trouble than its worth.

If anyone is thinking of swapping?

 

[RobF]

The remote is connected to the rear of the mounting bracket of the main unit.

It appears to be held in place by what I am going to nominate as four of the smallest cross head screws in the world.

A fiddly job, but should be doable.

 

[bigclick]

The remote is connected to the rear of the mounting bracket of the main unit.

It appears to be held in place by what I am going to nominate as four of the smallest cross head screws in the world.

A fiddly job, but should be doable.

Thanks, I have a 50% chance of chewing the heads (so at least one of the four lol)