Bosch nyon

[mickymole]

Hi does anyone know how to remove my info from the first gen nyon so I can sell it on.
Thankyou.

 

[AndyBike]

I think the term you're looking for is 'Factory Reset'
So I googled 'Bosch nyon factory reset' and the Ai came up with how to go about it.

*I would take note of the last section about reported problems in older models.

To factory reset a Bosch Nyon display on an eBike, you can either use the remote and display combination or the Bosch eBike Connect smartphone app. For the remote/display method, press the selection button (hash key) on the remote, then press the "+" button, and confirm with the selection button. Alternatively, navigate to the status screen on the Nyon display, then go to "My eBike" > "Reset trip data" and confirm with OK. You can also reset the Nyon via the Bosch eBike Connect smartphone app.



Here's a more detailed breakdown:
Using the Remote and Display:

1. Locate the remote: This is the small control unit attached to your handlebars.
2. Access the menu: Press the selection button (usually the hash key) on the remote.
3. Navigate to Reset: Find the option to reset trip data, usually within the "My eBike" section.
4. Confirm the reset: Press the selection button again to confirm the reset.
   

Using the Bosch eBike Connect App:

1. Open the app: Launch the Bosch eBike Connect app on your smartphone.
2. Navigate to settings: Go to the settings or system menu within the app.
3. Find Factory Settings: Locate the option to reset to factory settings.
4. Confirm the reset: Follow the prompts to confirm the reset.
   

Note: Some users have reported issues with Nyon resets, particularly with older models or after failed updates. In such cases, it might be necessary to contact a Bosch eBike dealer for assistance. Some users have also reported needing to remove the Nyon from Bluetooth pairings on other devices before a successful reset.

 

[mickymole]

Thanks for your advice.