Compatibility of Q11 48V 1kw with 09 bottle kit

[Mattjenkins1990]

Would

https://bmsbattery.com/ebike-kit/471-q11-48v1kw-rear-driving-disc-brake-hub-motor-
ebike-kit.html

and

https://bmsbattery.com/ebike-battery/701-48v116ah-bottle-09-panasonic-battery-torque-sensor-battery.html

work together, am i at risk of blowing up the BMS?

Cheers,

Matt.

 

[anotherkiwi]

THIS PAGE IS NOT AVAILABLE
WE'RE SORRY, BUT THE WEB ADDRESS YOU'VE ENTERED IS NO LONGER AVAILABLE.

First link is dead.

 

[anotherkiwi]

https://bmsbattery.com/ebike-kit/471-q11-48v1kw-rear-driving-disc-brake-hub-motor-ebike-kit.html

To make 1 kW you need a 25-30 A controller so you need a big battery with 30 A discharge if you want it to last a long time (on the road and several months life span). This one is better https://bmsbattery.com/ebike-battery/889-high-c-rate-48v245ah-li-ion-alloy-07-case-battery-pack-with-panasonic-battery-cells.html

 

[Mattjenkins1990]

Thank you

 

[Fordulike]

That motor is a direct drive type, so fine for flatitsh terrains, but don't expect great hill climbing ability, assuming the controller is 25A - 30A.

The battery cells, although rated at 10A and potentially giving you 40A continuous with a 4P configuration, aren't the best out there. You may find you lose capacity fairly quickly if you like to full throttle everywhere.

I don't know what your budget is, but you would probably be better off going for a mid drive such as a Bafang BBS02, coupled with a battery pack that contains cells such as the Samsung 30Q's. A set-up like this is more likely to give you a better grin factor, plus last a lot longer overall (battery anyway!)