Help! Manual of C961 Display

[Gh0stxSinghx]

Can you sent me show photo the Epoxy and chopped? If know i can repair the bottle.

 

[Deleted member 4366]

Unfortunately, I didn't take a photo.If you send Bezzer a PM, maybe he can show you. I mixed the fibreglass/epoxy. Then I found something the right diameter and wrapped it in cling-film(maybe an AAA battery or something like that. I held it in place while I filled the rest of the slot with the epoxy mix. I over-filled it slightly. When it had set, i removed the round thing and trimmed the epoxy with a Dremmel. I had to do a bit of final adjustment to make the hole slightly oval to fit the catch on the holder. when it was finished, it was better than new.

 

[Gh0stxSinghx]

I will Bezzer PM.

I was removed my battery, take photos

 

[Gh0stxSinghx]

I have sent Bezzer but no reply no worry. I have check with GBK the parts Bottle Battery, Him get part lock, Power cable long 100cm with female Air 4 pin and Part - Male Air 4 pin shipping to me.

 

[Gh0stxSinghx]

d8veh, I will future if any broken or low miles with my bottle battery, another battery, sent/PM them sent to u ok repair its.

 

[Deleted member 4366]

If you need any help, just ask.

 

[Gh0stxSinghx]

New Lock, 2nd Pic there what name or chopped?