Is the 1:1 the pedal hall sensor?

[Michael Love]

In my new ctrllr I think the 1:1 is the pedal hall sensor, anyone agre

And what is an electric brake?

 

[Andy-Mat]

In my new ctrllr I think the 1:1 is the pedal hall sensor, anyone agre

And what is an electric brake?
View attachment 28079

The brake sensor is for modern e-bikes, the brakes have a switch in the lever assembly, that when activated (usually a low signal), immediately shut s off the motor.
I have no opinion either way about the 1:1, myself.
regards
Andy

 

[Michael Love]

Hi, The low potential brake is there on black/white wires.

Thanks for your reply.

 

[Ajax]

In my new ctrllr I think the 1:1 is the pedal hall sensor, anyone agre

And what is an electric brake?
View attachment 28079

Here's a link to e-bike brakes just so you known what they look like.
It has a switch inside which cut out the motor, it also takes the normal break cable.

https://www.amazon.co.uk/Electric-Wuxing-Handles-Quality-Tricycle/dp/B01HO08JAQ/ref=sr_1_6?ie=UTF8&qid=1544390698&sr=8-6&keywords=electric+e-bike+brake

The 1:1 looks like the PAS sensor cable, its the one thing not mentioned which ought to be there. Here's what one of those look likes.

https://www.amazon.co.uk/L-faster-Electric-Cycling-Accessories-Assistant/dp/B01MXH67CA/ref=sr_1_3?ie=UTF8&qid=1544390986&sr=8-3&keywords=electric+e-bike+pas

 

[Nealh]

In my new ctrllr I think the 1:1 is the pedal hall sensor, anyone agre

Yes.

 

[Nealh]

Electric brake might Chinglish for Regen, just ignore it.

 

[Michael Love]

Electric brake might Chinglish for Regen, just ignore it.

Thank you all for your help. Turns out Amazon seller selling same thing, but without the display wires, and for some reason cruise wire is looped like the electric lock in this pictyre. So all i gotta do now is turn the assist hall sensor on this controller into female, anyone know of any way to do that?
Thanks again.

 

[anotherkiwi]

Thank you all for your help. Turns out Amazon seller selling same thing, but without the display wires, and for some reason cruise wire is looped like the electric lock in this pictyre. So all i gotta do now is turn the assist hall sensor on this controller into female, anyone know of any way to do that?
Thanks again.
View attachment 28087

Cut male plug and solder in female socket. Been there, done that with my last controller. Not just for the hall sensor plug unfortunately

 

[Nealh]

Connectors are SM 2.5mm, look on ebay for them. Available in pin count you require.