Hello,
there is a knocking noise coming from the bottom bracket of my Woosh Krieger. The Krieger has a Bewo mid-drive motor, also known as a TCM motor. I can't find any information on it online.
It has gradually been getting worse. It only happens in the mid gears, 3, 4 and 5. The motor/clutch/gear-case assembly is not loose on the bottom bracket so it must be the bearings. Also there is a little side play between the crank axle and the gear-case assembly. I have done 4,500 miles.
Is it possible to get replacement bottom bracket bearings for the Krieger? Are they cup and cone or caged bearings?
Thanks.
there is a knocking noise coming from the bottom bracket of my Woosh Krieger. The Krieger has a Bewo mid-drive motor, also known as a TCM motor. I can't find any information on it online.
It has gradually been getting worse. It only happens in the mid gears, 3, 4 and 5. The motor/clutch/gear-case assembly is not loose on the bottom bracket so it must be the bearings. Also there is a little side play between the crank axle and the gear-case assembly. I have done 4,500 miles.
Is it possible to get replacement bottom bracket bearings for the Krieger? Are they cup and cone or caged bearings?
Thanks.
Last edited: