Help! LED810 versus LED790

JohnD135

Pedelecer
Aug 24, 2020
41
0
Hi All.
I have just changed a broken controller for a new S-KU65 controller and it works well, with as much power as the previous one. I did this with a lot of help from this group for which I am grateful. But I have a small issue with power control. I have three power levels on the LED790 display, but now I seem only two in practice. The lower two levels are the same in performance, with the upper one definitely more. Should I change the display to a LED810? I notice that the paperwork for the S-KU65 mentions the LED810.
 

vfr400

Esteemed Pedelecer
Jun 12, 2011
9,822
3,985
Basildon
You can try it to see if it makes a difference. No harm will come as long as you make sure that the colours of the wires in the connector are the right sequence. Please let us know whether there's a difference.
 

JohnD135

Pedelecer
Aug 24, 2020
41
0
I have installed the new LED810 and all the three power levels now function. I would say that the difference between power levels is probably less than it was, but still acceptable. Thanks for your help.
 

Advertisers