Motor P1 setting?

[OldBob1]

Hi Folks, I am tinkering with an old E-Mtb (https://www.paramountzone.com/power-cruiser-electric-bike.htm) it has a direct drive motor.
Have fitted a SO6S controller and S_LCD display.
All seems to work OK, but not sure what would be the best setting for P1 in advance mode, seems to run OK at 214? but is there a better figure?
Regards Bob.

 

[anotherkiwi]

"P1 is motor characteristic parameter setting mode. P1 = motor gear reduction ratio x number of rotor magnet pieces, just rounding if there’s any decimal."

That one? Does a direct drive have a motor gear reduction ratio?

 

[OldBob1]

Thats what I have been thinking with direst drive, should be around the 10 to 30 ?