Friend of mine dropped her battery in as it wouldn't charge. So lid off and measured the cells, they were a bit unbalanced with a few under 3v so used my Imax to top those up, so all cells about 3.5v or above. But when using original charger it lights up red then after a few seconds goes back to green without adding any charge.
I've tried my SANS charger but same deal, red then green.
BMS board looks undamaged apart from cells 1 and 10 aren't on the main plug.
In the mean time I'll persevere with topping up all the cells right up to the limit.
Any ideas anyone?
I've tried my SANS charger but same deal, red then green.
BMS board looks undamaged apart from cells 1 and 10 aren't on the main plug.
In the mean time I'll persevere with topping up all the cells right up to the limit.
Any ideas anyone?