Hi there I’ve purchased this kit for daughters bike. 36v 250w 24inch lcd8+bluetooth 36v 10ah battery was wondering any one knows the best advanced settings are for this kit. These are the default settings but they are wrong.
Help! Regarding conversion kit.
- Thread starter Shamcc1985
- Start date
You need to tell us which pedal sensor you have, whether you have a throttle, which controller you have and of course, which motor. The settings will be different for different systems and how you want the throttle and pedal assist to behave.
C1=4 doesn't look right, but I can't say without knowing which PAS you have.
C3 would normally be 1
C4 would normally be 2
C1=4 doesn't look right, but I can't say without knowing which PAS you have.
C3 would normally be 1
C4 would normally be 2
250w wheel kit is 6 mosfet controller and PAS 8. That’s all I know I’ve taken throttle off as she doesn’t like the throttle idea. Just wants to use assist
We need to know which hub motor you are using, the P1 setting you have is for a D/D heavy black hub motor.
Can you show a link or pic of your motor ?
Without knowing very little else as not enough info has been supplied, try using the settings for the 6 mosfet controller as you are only using a 250w kit.
P1 possibly 84 if it is a geared hub.
C1 00
C3 8
C4 0
Can you show a link or pic of your motor ?
Without knowing very little else as not enough info has been supplied, try using the settings for the 6 mosfet controller as you are only using a 250w kit.
P1 possibly 84 if it is a geared hub.
C1 00
C3 8
C4 0