I'm converting a regular bike to e-bike using a set of components I found online:
Motor: Bafang 36V front wheel
Controller: Brainpower Motor controller (Model: 800A-6T)
Battery: 30 cell 36 V 8A Li-ion battery pack from jag35.
Throttle: Wuxing
Issue is with the handlebar twist throttle. As soon as I turn on the display, the motor starts whirring (wheel doesn't spin), when I twist the throttle, there is a bit of a delay, and then wheel turns at full tilt, and remains at full speed even when I release the throttle. When I twist the throttle a second time, the wheel stops spinning - although the wheel still makes noise and whirs. During this whole time, the tachometer on the LCD display reads 209 rpm - it's either 0 or 209 rpm. I don't have a voltmeter to test the voltage delivered by the throttle. Any ideas on what to do? I'm willing to dismantle the throttle and tinker, seeing as how they're cheap to replace.
Motor: Bafang 36V front wheel
Controller: Brainpower Motor controller (Model: 800A-6T)
Battery: 30 cell 36 V 8A Li-ion battery pack from jag35.
Throttle: Wuxing
Issue is with the handlebar twist throttle. As soon as I turn on the display, the motor starts whirring (wheel doesn't spin), when I twist the throttle, there is a bit of a delay, and then wheel turns at full tilt, and remains at full speed even when I release the throttle. When I twist the throttle a second time, the wheel stops spinning - although the wheel still makes noise and whirs. During this whole time, the tachometer on the LCD display reads 209 rpm - it's either 0 or 209 rpm. I don't have a voltmeter to test the voltage delivered by the throttle. Any ideas on what to do? I'm willing to dismantle the throttle and tinker, seeing as how they're cheap to replace.
