Torque arm

[Andy1865]

Sussed it lol

 

[Nealh]

it is likely 12 x 10, not seen a 12 x 9 for sale.

 

[vfr400]

Check again. If it is 12 x 9 you're going to have to mak a special torque arm. See whether a 9mm or 10mm spanner fits it.

 

[Andy1865]

A 10mm fits it, but with alittle bit of movement. 9mm does not fit it at all.

 

[Nealh]

You need 12 x 10, might find one on ebay. Or make your own, have one or two made up.

 

[Andy1865]

You need 12 x 10, might find one on ebay. Or make your own, have one or two made up.

Found a chap on Ebay ive bought 2 × 12×10 arms one for each side. Thanks for your input Neal

 

[Andy1865]

Got and fitted Torque Arms Neal

 

[Andy1865]

Got and fitted Torque Arms Neal

Neal may i have your input on a question about the S900 display which i posted earlier today?

 

[Andy1865]

Neal may i have your input on a question about the S900 display which i posted earlier today?

Its on the Tech Discussion post.