wire

Nealh

Esteemed Pedelecer
Aug 7, 2014
19,995
8,174
60
West Sx RH
They are hall sensor wires for sensored hubs they are for sine wave controllers , they have a white 6 pin block each colour matches the same colour in the block.
Most hubs are capable of running unsensored though a bit noisy if your controller has only the 3 phase wires then you have a square wave unsensored controller, just tape up the wire ends and tuck the lead away.
 

wheeliepete

Esteemed Pedelecer
Feb 28, 2016
2,047
755
60
Devon
You may want to connect the red, black and white wires into your speed sensor connector on the controller, it will save using the external one.
 

mygrumpy001

Pedelecer
Oct 12, 2015
62
0
80
You may want to connect the red, black and white wires into your speed sensor connector on the controller, it will save using the external one.
Hi the PAW Wires are blue- black-red controller brown-black-yellow or white-red-black or black-blue-red what one do i use John