Latest activity
-
Benjahmin replied to the thread Help! My next project.Bike has had several hours to cool down now. I've just run it up and down the village (flat road) and everything was working OK... -
Sturmey replied to the thread help with motor parts.The last motor (mxus) I dismantled had a circlip under the brass washers that needed removing. Also I needed to use two large... -
Nealh replied to the thread Battery Fires.and charging process used. -
Benjahmin replied to the thread Help! My next project.I have P1=128. Speed display did work but stopped mid ride. There is no speed sensor connected, never has been. So, as you say, it...
-
Jjbenn43457 replied to the thread Pedal assist not working.Followed your advice and it worked! Now the speed reading is all over the place, going to 0 when I stop pedaling, any suggestions...
-
saneagle replied to the thread Help! My next project.The speed reading comes from the speed sensor. If there's no speed signal from it, or if you have P1=0, the controller will take the... -
saneagle replied to the thread Battery Fires.I've been on this forum for 15 years. Ever since the beginning we've been getting monthly reports and articles about the latest...
-
Benjahmin replied to the thread Help! My next project.Very variable , but manged to keep it above 8. But these are long climbs on a warm day. First thing I did. I'm thinking that, because...
-
saneagle replied to the thread Help! My next project.I ran my 328 rpm Q128 at 48v with a T06S for 14 years without any problems. They're probaly thinking of 200kg Americans riding without...
-
RRaboa replied to the thread what size brake disc pads/.Thanks for the replies. You can also what is known as burping the brakes. Sometimes this is not enough and a bleed is required...
-
Nealh replied to the thread Help! My next project.How fast was one ascending when the controller got hot ?
-
chris_n replied to the thread what size brake disc pads/.The reason bike brakes will self bleed (usually) is because air is lighter than brake fluid and will always try to find the highest... -
Waspy replied to the thread what size brake disc pads/.Mate, I am definitely not trying to dispute your experience, but here is my personal experience for anyone who needs it: I have Shimano... -
saneagle replied to the thread what size brake disc pads/.And how many hydraulic brakes did you actually work on in said charity, and how many times did you try using the self-bleeding...
-
saneagle replied to the thread Help! My next project.Start by checking that the motor connector is in all the way to the line.