Latest activity

  • Benjahmin
    Benjahmin replied to the thread Help! My next project.
    Good info, thanks Neal. Motor only got midly warm. I'll ride tomorrow with the top off the controller box to feel what the controller...
  • cyclebuddy
    cyclebuddy replied to the thread Carrera E Vengeance.
    IIRC, it's either an STL battery or a Phylion. If the latter, then 3 flashing LED's only suggests it's wearing out at 70-80% of as new...
    • 1751657649922.png
    • 1751657726130.png
  • MikelBikel
    So Green, so sustainable, so safe.. oops :eek: RIP...
  • thelarkbox
    thelarkbox replied to the thread Carrera E Vengeance.
    Its a battery issue rather than a bike issue then. gotcha. - as above, also can you confirm the battery pack is fully charged and can...
  • saneagle
    saneagle replied to the thread Carrera E Vengeance.
    Unfortunately, Suntour don't give out the battery error codes. All we know is that it's indicating an error, which is probably a low...
  • B
    LOL guys thanks for all the grease lightning advise I was looking at the Circup and the collar on the axel where the wire comes out and...
  • Z
    Zain786kk replied to the thread Carrera E Vengeance.
    This is the button to check battery. When you hold it, it turns on the bike. I bought this bike from my friend a year or 2 ago and the...
  • thelarkbox
    thelarkbox replied to the thread Carrera E Vengeance.
    That looks like a battery level test button? - Not familiar with your bike tbh but generally the ON button is part of the handlebar...
  • saneagle
    The phase wires are normally soldered to the coils, not the pcb.
  • saneagle
    saneagle replied to the thread Pedal assist not working.
    Simple answer: Set P2=1. If that doesn't fix it, you need to fit a wheel magnet type sensor.
  • saneagle
    saneagle replied to the thread Help! My next project.
    Good point, Benjamin, disconnect the brakes and see if the problem goes away.
  • G
    garysnooker replied to the thread help with motor parts.
    my one has 4 keyways im thinking i might as well buy a new wheel woosh is not far away
  • P
    POLLY reacted to lenny's post in the thread Ebike News with :D Funny.
    Send UK's seized illegal dirt bikes to Ukraine to help beat Russia, MP urges...
  • harrys
    harrys replied to the thread Help! My next project.
    I'm using P1 = 150. It's used to calculate speed from the hall sensors and wheel diameter. A lower value will give you a lower speed...
  • Nealh
    Nealh replied to the thread help with motor parts.
    Bafang BPM & BPM-CST/BFRM-G070 Motor Gear Set 42T for Replacement Bafang BPM & BPM-CST motor gear kit for replacement [Bafang BPM &...