Latest activity
-
saneagle replied to the thread KT controller, KT LCD3 and pass - guide on working modes.It's a waste of time doing anything with the pedal sensor while the throttle isn't working properly. You should disconnect it it until... -
Nealh replied to the thread KT controller, KT LCD3 and pass - guide on working modes.P2 will typically be value 01 for most hubs as prettymuch most of them use only one magnet for sensing , however if the odo reads very... -
Nealh replied to the thread KT controller, KT LCD3 and pass - guide on working modes.Does the PAS red LED blink on/off as the magnets pass the sensor? With that type of sensor head positioning/cable tieing in place is...
-
Mmatthewslack replied to the thread New bike.Too far south for me to know. There's a shop in Keswick, plenty of Lakes up and down in easy reach, but that's probably too far north...
-
NSo back from a trip away, I've been inspired to push forward with a thought in mind of converting my 2013 Specialized Sirrus to...
-
-
Mmatthewslack replied to the thread New bike.If your riding is not going to change then the type of bike doesn't need to. Mid-drive comes into its own as the off road gets more...
-
PHi I'm not new to ebikes having had four - two folders, two full size, two second-hand, two brand new. But now I'm newly retired I'm...
-
saneagle replied to the thread Prices of the electricity we use to charge.Trouble is that your expertise on the weather might be about as your financial advice. The S&P 500 has gone up 20% since you said that...
-
saneagle replied to the thread KT controller, KT LCD3 and pass - guide on working modes.How can you solve the problem if you don't eliminate the possible causes?
-
saneagle replied to the thread Prices of the electricity we use to charge.Do you remember the recent floods in Dubai, where ther was cloud seeding done during the previous days, but it wasn't that, which caused...
-
Ssapphire_ad replied to the thread KT controller, KT LCD3 and pass - guide on working modes.P4 = "zero startup" C4= " zero starup" speed 20km/h speed sensor hall; speed on lcd - need to records as difficult to test and wach...
