Latest activity
-
Sspleenharvester replied to the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load.Cheers both, and good spot - I've since rerouted both the green phase wire and the yellow phase wire and it is sitting much nicer now...
-
Sspleenharvester reacted to matthewslack's post in the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load with
Like.
The big green phase wire is worn through, and so able to short to the casing... that might well cause some noise. Rust particles in the... -
Sspleenharvester reacted to Sturmey's post in the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load with Like.
I wonder is the side cover rubbing of the green wire where the insulation has worn away?
-
RRaboa replied to the thread AKM thru axle hub.Topeka do a thru axle trailer adapter, I don't know if this could modified to fit torque arms...
-
Mmatthewslack replied to the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load.The big green phase wire is worn through, and so able to short to the casing... that might well cause some noise. Rust particles in the...
-
Sturmey replied to the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load.I wonder is the side cover rubbing of the green wire where the insulation has worn away? -
-
Sscbk replied to the thread Yuba Mundo cargo bike with Tongsheng TSDZ8.The display is an M58, which is okay It's not always very easy to read in daylight (with the brightness turned right up). And there's no...
-
Just finishing this, it's a Yuba Mundo with a Tongsheng TSDZ8. After numerous front & rear hub motor conversions, this is my first mid... -
Sscbk posted the thread Yuba Mundo cargo bike with Tongsheng TSDZ8 in Conversion Kits General Discussion.Just finishing this, it's a Yuba Mundo with a Tongsheng TSDZ8. After numerous front & rear hub motor conversions, this is my first mid...
-
-
PThanks, I think I'll go with a Dahon and convert with woosh. That's more within budget.
-
Sstano9 replied to the thread Folding bike for weekend cruising.Thanks, I think I'll go with a Dahon and convert with woosh. That's more within budget.
-
StuartsProjects replied to the thread Folding bike for weekend cruising.Spare batteries from Brompton can be an issue yes. There is a conversion kit available for the G-Line that uses Bosch power tool... -
Mmarkmelrose1974 replied to the thread Dead Bike.will double check voltmeter when pal comes home. it was out in the shed with full battery in january so approx 6.5 months and not quite...
-
Sspleenharvester replied to the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load.Ok I've pulled the motor off the bike. The noise is definitely coming from the planetary gears - you can kind of feel some intermittent...
-
-
Mmarkmelrose1974 replied to the thread Dead Bike.unfortunately it does not say in manual i have it but just in case i downloaded it but was same
