Latest activity
-
AI think that when you pedal hard past the speed limit the controller decides that it has massively overshot the setpoint and then over...
-
Rrickyboy replied to the thread Orbea gain lights.I seem to be getting around 5v at the plug when the lights are turned on by the Pulsar one. When I put a meter across the light...
-
SSparksandbangs replied to the thread Help! My next project.I think that when you pedal hard past the speed limit the controller decides that it has massively overshot the setpoint and then over...
-
SStanebike replied to the thread KT controller, KT LCD3 and pass - guide on working modes.Thanks sapphire_ad. So now I know it can be done I’ll see if my sister is still willing to let me have a go at it.
-
SStanebike reacted to sapphire_ad's post in the thread KT controller, KT LCD3 and pass - guide on working modes with
Like.
Hi Stanebike, All soldering is done now! The hall and phase wires gave me a bit of trouble, but thanks to Saneeagle’s advice I found... -
Rrickyboy replied to the thread Orbea gain lights.Yes I have multiple sets but just get annoyed when things stop working. I can't leave as is.
-
Benjahmin replied to the thread Help! My next project.I'll try on next ride. On the stand 6 seemed to be giving an odd reading. I fitted an external sensor that I bought with the motor. I... -
Eeas2lv replied to the thread Solution for Swytch Kit Users Needing Battery Replacements or Longer Range.Another competition on ebay, though not as nice as a 3D printed adapter...
-
saneagle replied to the thread Help! My next project.P2 should be 1 or 6, not zero. That should sort out your speed reading as long as you have a working speed sensor. -
saneagle replied to the thread Hech Hog and the Vitus e-mythique..The LCD works independently from the motor. If it won't switch on, either it is not receiving battery voltage or it has a communication...
-
Benjahmin replied to the thread Help! My next project.Got my new motor, 36v 201rpm, built into wheel and given initial test today. This motor is much happier on hill climbing. Just did a...
-
saneagle replied to the thread Brake hose.I think you need to explain what's going on and which brakes you have. What happened? Don't tell me it was "the dog ate my brakes"...
-
saneagle replied to the thread KT controller, KT LCD3 and pass - guide on working modes.We need to know how much better it is than the original system, plus, we need to know what was the final sequence of phase and hall...
-
Waspy replied to the thread Brake hose.Do you mean the Wisper 905 Torque Crossbar? This bike came with cable operated disk brakes. Has yours been upgraded to hydraulic... -
thelarkbox reacted to sapphire_ad's post in the thread KT controller, KT LCD3 and pass - guide on working modes with Like.
Hi Stanebike, All soldering is done now! The hall and phase wires gave me a bit of trouble, but thanks to Saneeagle’s advice I found...