Latest activity

  • P
    Peter.Bridge replied to the thread Bosch Battery Question.
    We didn't buy a second battery but the one from allbatteries that she bought a couple of years ago worked very well. The hub gears on...
  • S
    Sparksandbangs replied to the thread Crank removal.
    https://www.aliexpress.com/item/1005006256822367.html
    • 1753190624839.jpeg
  • S
    Sparksandbangs replied to the thread Crank removal.
    If you are talking about removing the bottom bracket then if it has been there for a long time then it will be almost impossible to get...
  • V
    volt x replied to the thread Crank removal.
    I'm trying to remove the bottom crank and this is turning out to be a problem. Drive side is turn right to remove, left to tighten...
  • saneagle
    saneagle replied to the thread Crank removal.
    It's a hexagon to remove the nut on the end of the crank if you have one.
  • S
    Sparksandbangs replied to the thread Crank removal.
    Until you strip the threads out the crank arm. Then swear a lot.
  • M
    matthewslack replied to the thread Crank removal.
    If it is like this... ...isn't the end a 1/2" square socket drive? In which case use your longest, strongest Tommy bar and if...
    • Screenshot_20250722-133140_Chrome.jpg
  • V
    volt x replied to the thread Crank removal.
    Okay strike that, I've just managed to remove both sides. I've been using adjustable wrenches, the first one I used was a bit not...
  • Cadence
    Cadence replied to the thread Crank removal.
    Tighten the tool as much as you can without rounding the flats on it, then give the end a single hefty blow with a decent sized mallet...
  • V
    volt x replied to the thread Crank removal.
    The removal tool itself, I can't think of what you might call the part where a spanner would be use, let's say it looks like a nut a...
  • saneagle
    saneagle replied to the thread Crank removal.
    What nut edges are being worn away? Normally, no nuts are involved.
  • V
    volt x replied to the thread Crank removal.
    Rather than start a new thread , I'll come in here and hope for a solution to my issue. I can remove the crank arm on the left side...
  • M
    matthewslack replied to the thread Off grid battery charging.
    That's a lot of battery. Good side to that is that it does not matter so much about charging as you ride because the range is...
  • Cadence
    Cadence replied to the thread More Seizures.
    Yes, I did think about that, but if you have brake cutouts the coppers can't do it that way. One of my bikes has a KT-TF01, which...
  • S
    Sparksandbangs reacted to saneagle's post in the thread More Seizures with Like Like.
    You apply the brake at the same time.