Latest activity
-
Yes, that should sort it, though you should charge at 0.2C, not 0.2 MPS. The cells are probably around 2500 mAh, so that would be 0.5... -
PYes, that should sort it, though you should charge at 0.2C, not 0.2 MPS. The cells are probably around 2500 mAh, so that would be 0.5...
-
saneagle replied to the thread Battery woes again.Yes, that should sort it, though you should charge at 0.2C, not 0.2 MPS. The cells are probably around 2500 mAh, so that would be 0.5... -
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Lishui controllers have better hardware. They are smaller with a more powerful processor. The stock software in the KT is better for...
-
IMy last wisper 575 battery died on me so I bought another 2nd hand one and have taken good care to recharge it after each cycle which is...
-
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Plan is not to live up to my name.
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I have a FT232 USB UART Board but unfortunately it was unsuccessful when I tried to flash through the display connector. It's taken days...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with
Informative.
Followed the instructions from the Wiki. Connected ST-Link V2. Opened the Java tool. Set up the battery levels, switched off torque... -
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Like.
I’ve had the urge to tinker with firmware for ages and have decided to take the plunge. As I want to use the bike while I'm...
-
HHkphooey posted the thread Hi - from a London leisure cyclist new to ebiking in Introduce Yourself!.Hi all, thought I would do a quick intro as I recently joined this forum I’m a 50 something that has retired this year and so looking to...
-
MikelBikel replied to the thread Brexit, for once some facts..Yeah, the TDS out there is pretty bad. :) -
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I’ve tweaked the code in Eclipse. Fairly sure that I’ve set up all the parameters correctly. Changed the display to the LCD3. Go to...
-
Mmatthewslack replied to the thread Help! My next project.A frequency meter attached to one of the hall sensor outputs would shed a bit more light.
-
Benjahmin replied to the thread Help! My next project.The way this occurs, I could see that a spinning mass that has inertia might be playing a part - somehow. As per my post 214, pedalling...
