Latest activity
-
SSparksandbangs replied to the thread Crank removal.That happened to me. I stuck the bottom bracket in a vice and used a set of stillsons on the knurled ring. Ended up with a couple of...
-
PC2017 replied to the thread Temporary thread for sharing photos with PC2017.I re-read, it was vague, with no nuance and the word "setups" instead of rig or bike. It was late afternoon & a bad day, the odd fact... -
Vvolt x replied to the thread Crank removal.I like the way you think and your solution though very risky might be the way forward. Like you say wait for more replies. The other...
-
PC2017 reacted to guerney's post in the thread Temporary thread for sharing photos with PC2017 with
Funny.
You beat the aye-aye playing chess in 1994 and it bears a grudge? My theory is some scummy so called "AI" merchant is littering old... -
SSparksandbangs replied to the thread Crank removal.I'd definitely go for the saw looking at that but I do have a habit of using brute force and ignorance. There may be a better way. Cut...
-
Vvolt x replied to the thread Crank removal.What we have here is a frame with a sheared piece left inside. I do have all the gear to get a good picture but what more info will it...
-
SSparksandbangs replied to the thread Crank removal.Four ways off the top of my head. Bike shop Nipple extractor if you can find the right size. Penetrating oil soak night before...
-
Vvolt x replied to the thread Crank removal.Yes I can remove the crank spindle , the broken part is on the non drive side. I could try to take a photo of the piece but it...
-
SSparksandbangs replied to the thread Crank removal.I would have to see the bit that remained in the frame. Does the other side unscrew? Best advice I can give is don't rush into...
-
Vvolt x replied to the thread Crank removal.Well if it could go wrong it most likely will do it in the worst way possible. As you can see from the pic , I've sheared the...
-
Bear79 replied to the thread ANANDA REAR MOTOR R210.No its not working so i must replace it. It's not that I don't like it ethically but its for secure. Thanks -
You can buy motor cables from ebay; however, it's very difficult to get the cable through the axle, so you should only attempt the...
-
GGrahamsteven replied to the thread Carrera battery.Thanks for that will keep you in mind
-
BBaz the balloon man replied to the thread Carrera battery.Hi I have some very good used Carrera batteries for sale Two are the 11.5 AH message me if you are looking for a spare . And a 8.5AH...
-
saneagle replied to the thread Lishui Controller Modification - Firmware Flash Project.Some controllers require a high pulse, others require a low pulse from the speed signal. You have to experiment to see what works.