Latest activity

  • V
    volt x replied to the thread Crank removal.
    Yes mine is 84 as opposed to the normal it seems 68. Does the bike being an e bike make any difference
  • saneagle
    saneagle replied to the thread Crank removal.
    All I see right now in post #58 is a label.
  • saneagle
    In the normal situation with a non-zero setting for P2, the speed displayed comes from the speed sensor and wheel size. The cut-off...
  • S
    Sparksandbangs replied to the thread Crank removal.
    Top picture on post #58. I reproduced the picture. FP-B917/9N L: 135.5 C:29 L< 84 >R BC 1.37"x24T
  • saneagle
    saneagle replied to the thread Crank removal.
    Show a picture of the whole thing that fits on my page so that I can see what it is. I can't see any of your other pictures because...
  • S
    Sparksandbangs replied to the thread Crank removal.
    An 84 140. I'm sure someone else will be able to do better...
  • S
    Sparksandbangs replied to the thread Crank removal.
    I maybe being stupid by the picture posted has 84 where it usually says 68. I'm well out of my knowledge range here so will leave it to...
    • 1753461747464.jpeg
    • 1753461929894.jpeg
  • V
    volt x replied to the thread Crank removal.
    Is it possible to buy any similar piece and transfer all the parts onto the original spindle.
  • S
    Sparksandbangs reacted to volt x's post in the thread Crank removal with Like Like.
    Yay this tool did the job . I bought a set of these when I was working on the motor and needing to remove the gears which had circlips...
  • V
    volt x replied to the thread Crank removal.
    It's a volt pulse x, the measurement I've taken is from end to end. It's the original so I need like for like. I have posted a pic in...
  • V
    volt x replied to the thread Crank removal.
    The spindle is a Feimin, I earlier googled Felmin and got nothing. now with the right spelling I have found it, but have to look further...
  • saneagle
    saneagle replied to the thread Crank removal.
    What bike is it? 135mm is very long - not a common size. What's the reason for needing such a long one?
  • V
    volt x replied to the thread Crank removal.
    It's square taper, the attached pic shows a number 6 then some kind of symbol. I took that 6 as being 68. only because I had seen on...
  • R
    Raboa replied to the thread Crank removal.
    The best I can find is this, 131mm X 68mm. I would contact the bottom bracket maker to see what model replaces it...
  • P
    You can find them on Aliexpress. Search for thin or narrow silver fish battery.