Latest activity
-
AMy recommended way to fit those batteries is to drill a 5.5mm hole in the middle of the aluminium part; put the battery base in position...
-
saneagle replied to the thread Prices of the electricity we use to charge.Good idea; however; the amount of CO2 you breathe out increases in proportion to the energy you expend, so your clean energy is not so... -
saneagle replied to the thread 250w Ebike Kit with KT Controller.My recommended way to fit those batteries is to drill a 5.5mm hole in the middle of the aluminium part; put the battery base in position...
-
TTony1951 replied to the thread cyclotricity stealth 1000w will not de-restrict.Apologies for this post. I had not read the whole thread coming across it in the 'What's New section, and had not realised that the...
-
SSparksandbangs replied to the thread Torque Simulation with Yose Power Lishui Controller.The dual hall PAS only works one way. The controller can be coded to recognise direction but is a waste of processing when using the...
-
TTony1951 replied to the thread Prices of the electricity we use to charge.Actually - your're right, and it reminds me - when I was thinking about low carbon energy, I should have considered the hub alternator...
-
-
Sturmey replied to the thread Torque Simulation with Yose Power Lishui Controller.Any test certs I came across for EN15194 compliance, shows that "Assistance shall be provided only when the cyclist pedals forward"... -
-
SIf you don't have anything better, this looks OK for £3.21. The trick with Aliexpress is to click at the same item listed separately at...
-
SSparksandbangs replied to the thread Torque Simulation with Yose Power Lishui Controller.Resetting the pedals when stopped at a traffic light could be fun. Off you shoot. I don't know the type of PAS on the Yose Power kits...
-
AIt's just the standard "Hailong Max" battery cradle. With a 48v 20Ah battery you ideally need 3 attachment points on the down tube...
-
Aazy77 replied to the thread 250w Ebike Kit with KT Controller.Would the filing possibly have to cover something like the red marked area?
-
-
PPeter.Bridge replied to the thread 250w Ebike Kit with KT Controller.It's just the standard "Hailong Max" battery cradle. With a 48v 20Ah battery you ideally need 3 attachment points on the down tube...
-
ARear drop-outs are normally 10 mm, so there's a good chance that a motor will go straight in. Q/R front drop-outs are normally narrower...
-
Aazy77 replied to the thread 250w Ebike Kit with KT Controller.Is it me or does that battery on pswpower seem to have it's bolt holes way higher up near the tapered end compared to other batteries...
-
PRear drop-outs are normally 10 mm, so there's a good chance that a motor will go straight in. Q/R front drop-outs are normally narrower...
