Latest activity
-
TTortus replied to the thread Bafang clutch.I just wonder if the springs are rusted away? saying that I cant hear anything rattling when I shake it.
-
PPhilEB replied to the thread Wisper 803.I have tried swapping the LCD control units and the batteries. The fault stays with the same bike. I could try swapping the back...
-
TTortus replied to the thread Bafang clutch.Got it steeping in degreaser, will leave it for a few days. Thanks
-
Eesuark replied to the thread Bafang clutch.As above a member on here did exactly that soaked his clutch in some degreaser or some such liquid to get his working worth a try.....
-
Nealh replied to the thread Bafang clutch.One won't see any benefit from regen on a bike. -
PPhilEB replied to the thread Wisper 803.The link was here a minute ago. I give up for today
-
Sturmey replied to the thread Bafang clutch.Try working some 3in one oil down into the clutch and wiggling it back and forward. Sometimes it works. -
SI was only joking. I knew it was atypo. I was just waiting for details of what your problem was. That VR400 was terrible. He made out...
-
TTortus replied to the thread Bafang clutch.Great, thanks for that. What would happen if I welded the clutch so it was always in drive? I suppose when I stopped pedalling the motor...
-
Nealh replied to the thread Bafang clutch.If the connector is a std nine pin Julet then yes. All of the AKM's use a two stage gear set so internal hub gearing won't be too...
-
TTortus replied to the thread Bafang clutch.Cheers, will it work with all the electrics that are already on the Halfords Crosscity?
-
Nealh replied to the thread Bafang clutch.I doubt that one will be able to find them tbh, better off buying an AKM hub for which we know the gear sets are available.
-
Kev_w reacted to soundwave's post in the thread Prices of the electricity we use to charge with
Like.
-
TTortus replied to the thread Bafang clutch.40 on big cog 26 on small. Cheers
-
Kev_w replied to the thread How To Size and Cut a Threadless Bicycle Fork.There's spacers with 1 1/8 holes in them from the auction site, I've a lathe so make my own and always cut the tube too long, as has...